Operation Manual

Safety and Instruction Manual
9
Helpline: [phone]
6. Place the sharp edge of the scissors
upwards, and slowly move the edge along
the incline of the guide. Carefully draw the
scissors along the edge when they make
contact with the grinding wheel.
7. Repeat the sharpening process 3-4 times.
To sharpen the right edge of the knife blade,
use the
Note: Only a small amount of pressure is
required for best results.
8. Adjust the angle between the scissors and
the incline of the guide according to the
thickness and size of the scissors.
9. Sharpening the other scissors blade the
same way.
10. Once you have nished sharpening the
scissors, press the On/Off switch to the
‘0’ position to turn off the knife sharpener.
Unplug from the mains and press the auto
retractable cord button to wind the cord for
storage.
SharpeningScrewdrivers:
Flatheadscrewdriversonly.
1. Place the knife sharpener on a at and
stable surface.
2. Insert the plug into a mains power outlet.
3. Press the On/Off switch to the ‘I’ position to
turn on the knife sharpener.
4. With one hand holding the handle of the
screw driver, hold the knife sharpener rmly
for extra stability.
5. Insert the head of the screwdriver into the
screwdriver slot until it makes contact with
the grinding wheel.
6. Repeat on both sides of the head.
7. Once you have nished sharpening the
screwdriver, press the On/Off switch to the
‘0’ position to turn off the knife sharpener.
Unplug from the mains and press the auto
retractable cord button to wind the cord for
storage.
RestTimes:
Do not use the knife sharpener for more than 3
minutes at a time.
After 3 minutes of continuous use, the knife
sharpener must be rested for 20 minutes before
next use.
GrindingWheel:
The grinding wheel may produce some sparks
during use. This is normal.
If the scissors, knife or screwdriver blocks
the grinding wheel during use, or the grinding
wheel does not turn, remove the object to
be sharpened from the guide. Turn the knife
sharpener off and do not use for at least 20
minutes.
Failure to do so may result in damage to the
appliance.