Whisper Lift II PRO Advanced Swivel TV Lift Manual
Whisper Lift II PRO Advanced Swivel TV Lift 2 Table of Contents Contents About Your Touchstone Whisper Lift II PRO Advanced Swivel TV Lift ............................................................ 3 Lift Features .............................................................................................................................................................. 3 Safety ..............................................................................................................................
Whisper Lift II PRO Advanced Swivel TV Lift 3 About Your Touchstone Whisper Lift II PRO Advanced Swivel TV Lift Congratulations on the purchase of your Touchstone Whisper Lift II PRO Advanced Swivel TV Lift. Touchstone Home Products takes pride in the quality craftsmanship and smooth functionality of our TV lift mechanism. Please take a few minutes to learn about the features of your TV lift to ensure you get the optimum use and performance from your new purchase.
Whisper Lift II PRO Advanced Swivel TV Lift 4 Safety Mounting your flat screen TV to the Touchstone Whisper Lift II PRO Advanced Swivel TV Lift is fast and easy. Operating your lift is very straightforward. However, to avoid the risk of personal injury and to ensure optimum performance of your TV lift mechanism, please pay particular attention to the warnings and safety notices throughout this manual. IMPORTANT SAFETY and PRE-INSTALLATION INSTRUCTIONS 1.
Whisper Lift II PRO Advanced Swivel TV Lift 5 Lift Components & TV Installation Hardware Components Hardware - TV Mounting Screws -> Please consult your TV manufacturer for the size and length of the mounting screw for your TV. Included is a basic set of mounting screws that accommodates most LCD/Plasma TVs. Depending on your television, the screws included in the kit may not fit your television. If that is the case, these screws can be purchased at most hardware/home improvement stores.
Whisper Lift II PRO Advanced Swivel TV Lift 6 Assembling Your Whisper Lift II PRO Advanced Swivel TV Lift Adjusting Lift Mounting Supports Tools Needed: - adjustable wrench Instructions: The Whisper Lift II PRO Advanced Swivel TV Lift ships with 2 mounting brackets pre-installed on the back of the lift as shown in the picture below: Typically, these brackets do not require any adjusting by the customer.
Whisper Lift II PRO Advanced Swivel TV Lift 7 Operating the Whisper Lift II PRO Advanced Swivel TV Lift Operating the Wireless Remote The remote control for your Touchstone Whisper Lift II PRO Advanced Swivel TV Lift is controlled via radio frequency. You do not need to point the remote control directly at the cabinet to operate the lift.
Whisper Lift II PRO Advanced Swivel TV Lift 8 Mounting and Installing the TV IMPORTANT: Prior to installing the TV onto the lift, please ensure the following: - If you have not done so already, remove the stand from your flat screen TV. - TV weight needs to be under 75 lbs. - TV has VESA compliant mounting pattern.
Whisper Lift II PRO Advanced Swivel TV Lift 9 Attaching TV Mounting Brackets to Flat Panel TV- cont 3. Align TV mounting brackets so that brackets are centered on the back of the TV. Place the TV mounting bracket so that the slotted holes are toward the top of the TV, while the round holes are toward the bottom of the TV. 3. Attach TV mounting brackets to back of TV. Consult your TV owner’s manual for the proper size mounting screw. 4.
Whisper Lift II PRO Advanced Swivel TV Lift 10 Fasten Lift To Cabinet Parts Needed: The Whisper Lift II PRO Advanced Swivel TV Lift has 8 mount points (2 on the back of the lift and 6 on the floor). Use the rear 2 mount points and at least 4 of the 6 floor mount points to mount the lift in your cabinet. Instructions: 1. Open cabinet lid and place lift in cabinet. 2. Align lift with mounting holes on floor and back wall of cabinet (fig A) 3.
Whisper Lift II PRO Advanced Swivel TV Lift 11 Installing Swivel Bracket on TV Lift Tools Needed: - adjustable wrench - size 5 metric hex wrench Parts Needed During This Step: - TV Lift - swivel bracket - 4 large hex screws- size 5 - 4 large lock nuts Instructions: 1. After fastening the lift to the cabinet, gather the swivel bracket, 4 large hex screws, and 4 large lock nuts. 2.
Whisper Lift II PRO Advanced Swivel TV Lift 12 Installing Swivel Safety Sensor Parts Needed During This Step: - swivel safety sensor - swivel safety sensor cable Instructions: 1. Extend the swivel bracket so that you have access to the sensor position on the swivel bracket. 2. Thread swivel sensor cables through the hole in the swivel bracket. Sensor Wire Hole Thread Wire Into Hole Sensor Wire Threaded Through Hole www.touchstonehomeproducts.com 800.215.
Whisper Lift II PRO Advanced Swivel TV Lift 13 Installing Swivel Sensor – cont 3. Connect Blue and Brown wires to swivel sensor. Install the brown wire on the top connection and the blue wire on the bottom connection as shown below. Top Connection Bottom Connection Back of Swivel Sensor Connect Brown Wire To Top Connection Connect Blue Wire To Bottom Connection 4. After connecting the swivel sensor wires to the swivel sensor, install the swivel sensor in the holder as shown below: www.
Whisper Lift II PRO Advanced Swivel TV Lift 14 Installing Swivel Sensor – cont 5. When the swivel bracket is in the closed position, the swivel bracket will engage the sensor and allow the lift to run up and down. Swivel Sensor in Closed Position (side view) When the bracket is pulled away from the lift, the sensor will disengage and the lift will not be able to be operated. Swivel Sensor in Open Position (side view) www.touchstonehomeproducts.com 800.215.
Whisper Lift II PRO Advanced Swivel TV Lift 15 Hookup Lift Control Box and Power Supply Parts Needed During This Step: - Control box - Power supply - Wired remote Instructions: Control Box Connections Control Box Connections (side view) A = 12v Trigger Port B = IR Sensor Port www.touchstonehomeproducts.com 800.215.
Whisper Lift II PRO Advanced Swivel TV Lift 16 Hookup Control Box and Power Supply – cont. Installing Control Box 1. Attach the control box to your cabinet using the 4 screws provided. Attach Lift Cable into Control Box 1. Plug the lift motor cable into the Lift Cable Connection on the control box. Install Wired Remote 1. Connect the cable from the wired remote to the Handset Cable Connection cable on the control box. 2.
Whisper Lift II PRO Advanced Swivel TV Lift 17 Hookup Control Box and Power Supply - cont Install Power Cable 1. To connect power cable from power supply to power cable on control box, line up the connections on each cable so they match and slide the plug on the control box end into the connection on the power supply. 2. Close clip to secure power supply cable in place. 3. Attach power supply cable to power supply. 4. Remove velcro from back of power supply and install power supply in cabinet. www.
Whisper Lift II PRO Advanced Swivel TV Lift 18 Hookup Control Box and Power Supply - cont Install Swivel Sensor In order to operate the swivel, the sensor switch needs to be attached to the control box. 1. Remove plug from swivel sensor connection on control box. ***NOTE: Keep plug in safe place in case you decide to operate lift without swivel bracket. Locate plug covering pins on swivel sensor Remove plug Plug removed 2. Plug swivel sensor cable into swivel sensor cable connection on control box.
Whisper Lift II PRO Advanced Swivel TV Lift 19 Install Sensor If you plan to use the Whisper Lift II PRO Advanced Swivel TV Lift with an existing IR remote control, attach the IR sensor to port B on the side of the control box. IR Sensor Cable After installing the IR Sensor cable, install the IR sensor cabinet into your cabinet. Please refer to p.21 for instructions on pairing the Whisper Lift II PRO Advanced Swivel TV Lift with your existing IR remote control.
Whisper Lift II PRO Advanced Swivel TV Lift 20 Installing TV on Swivel Bracket Tools Needed: - Phillips-head screwdriver Instructions: UP 1. Using the internal wired control, move the lift to the full up position. The UP button is the button opposite of the cable side of the wired remote. DOWN 2. Once the lift is fully raised, hang TV on swivel bracket. The top hooks on the TV brackets will connect to the top of the swivel bracket as shown below.
Whisper Lift II PRO Advanced Swivel TV Lift 21 Install TV on Swivel Bracket – cont. 3. After hanging the TV on the swivel bracket, center the TV on the bracket and install the locking screws to hold the TV in place. Install mounting screw in holders on TV bracket Tighten screw so that it is finger-tight to the swivel bracket 4. Using a Phillips-head screwdriver, tighten the locking screws so that they are tight to the swivel bracket. 5. The TV is now installed on the swivel bracket and ready for use.
Whisper Lift II PRO Advanced Swivel TV Lift 22 Setting Adjustable Roller Height Each Whisper Lift II PRO Advanced Swivel TV Lift comes with an adjustable roller assembly that allows you to set the maximum height of the lift. Tools Needed: - adjustable wrench or 4mm socket wrench - size 4 metric hex wrench Instructions: 1. Raise the lift to a height that is comfortable for you to work at. 2. The adjustable roller is held in place by 2 4mm hex screws on either side of the lift.
Whisper Lift II PRO Advanced Swivel TV Lift 23 Whisper Lift II PRO Advanced Swivel TV Lift Features Pairing Universal IR Remote with Whisper Lift II PRO Advanced The Whisper Lift II PRO Advanced Swivel TV Lift can be paired with your existing universal IR remote control. To pair a universal IR Remote control with the Whisper Lift II PRO Advanced Swivel TV Lift, please follow the directions below: 1. Initialize the Control box.
Whisper Lift II PRO Advanced Swivel TV Lift 24 You will now be able to operate the Whisper Lift II PRO Advanced Swivel TV Lift with your IR remote control. Whisper Lift II PRO Advanced Swivel TV Lift Features - cont Setting Lift Height With the Whisper Lift II PRO Advanced Swivel TV Lift, you can set the height of the lift, so that it stops at the same height every time. To set the lift height, do the following: 1. Lower the lift to the bottom of the cabinet. 2.
Whisper Lift II PRO Advanced Swivel TV Lift 25 Optional Accessories Assembling Component Shelf (optional) For your convenience, Touchstone Home Products offers a component shelf that will attach to the Whisper Lift II PRO Advanced Swivel TV Lift for storing components such as a DVD player, cable box, etc. Tools Needed: - adjustable wrench - size 5 metric hex wrench - size 4 metric hex wrench Component Shelf Parts Instructions: 1.
Whisper Lift II PRO Advanced Swivel TV Lift 26 Assembling Component Shelf – cont 2. Using the 2 remaining small nuts and bolts (D), attach the shelf brackets (C) to the lift. The shorter end of the shelf bracket attaches underneath of the shelf. Shelf Brackets Shelf Brackets 3. When completed, attach the component shelf to the lift using the 2 large hex bolts (E) and nuts provided. Assembled Component Shelf Component Shelf Attached to Lift www.touchstonehomeproducts.com 800.215.
Whisper Lift II PRO Advanced Swivel TV Lift 27 IR Repeater Kit (optional) The Touchstone Infrared Repeater allows the customer to install a small satellite TV/cable box in the bottom of the cabinet. The Touchstone Infrared Repeater allows the you to change the channel on their box without having direct line of sight to the component. For more information on the Touchstone Infrared Repeater Kit, please visit http://www.touchstonehomeproducts.com/irrepeaterkit.
Whisper Lift II PRO Advanced Swivel TV Lift www.touchstonehomeproducts.com 28 800.215.
