User guide

4
3. After firmly installing the fireplace box, move the glass panel back to the fireplace box and secure
the glass panel using the two screws to lock in both sides (Figure A p.3).
4. The fireplace will look like this after the installation (Firgure D)
SPECIAL FEATURES OF THIS FIREPLACE
• The smoldering glow of the flames can hardly be distinguished from that of a real fireplace.
• Produces heat on a separate setting.
• Automatic and constant temperature control.
• Fireplace can be both used as Wall Hanging and Build-in the wall
• Perfect for rooms of any size.
• Timer (0.5hrs to 7.5hrs)
• Operated with remote control and Manual Panel Switch
• Dimmer (Five steps Flame adjust from Dimmer to Lighter)
SAFETY INSTRUCITONS
• Only use the appliance in accordance with the instructions in this manual! It cannot be used for any
other purpose.
• Never operate when the fireplace or the main cable show any signs of damage.
• In order to avoid overheating, do not cover the heater.
• Be responsible when handling the packing material. Warning: plastic wrapping may be lethal to
children.
• Never operate the heater on a program switch, timer switch or any other appliance for automatic
operation.
• The heater is only suitable for indoor use.
• Never use the heater in the bathroom, shower or near a swimming pool.
• The heater must not be located immediately below a socket-outlet
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, a similarly
qualified person in order to avoid a hazard.
• Never leave small children unattended near the appliance.
• In case of malfunction, disconnect the plug immediately.
• When not in use for a considerable amount of time, unplug the appliance.
• Components should only be serviced by an approved electrician.