User guide

UNPACKING AND TESTING APPLIANCE

Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the

appliance operates properly by plugging the power supply cord into a conveniently located 110-120 Volt

grounded outlet.

GROUNDING THE APPLIANCE

This appliance is for use on 120 Volts. The cord has a plug

as shown in (A). An adapter as shown in (C) is available

for connecting three-blade grounding type plugs to two-slot

receptacles. The green grounding lug extending from the

adapter must be connected to a permanent ground such as

a properly grounded outlet box. The adapter should not be

used if a three-slot grounded receptacle is available.

To disconnect appliance, turn controls to off, then remove

plug from outlet.

WARNING:

Keep the front of the appliance through which the heat is

radiated at least 3 feet away from furniture, curtains and

other flammable objects at all time.

Never use an extension lead. The mains cable must remain

at the back of the appliance and must not be in contact with

any hot elements.