Installation Instructions

The dimmer can turn the light on or off by touching anywhere in the middle where the LEDs indicate
the dimmer level. iotGizmo Dimmers always remember the previous brightness level and illuminate
your lights to the previous setting.
If you want to change the brightness level, slide finger or thumb up or down the middle over the LED
indicators to set the dimmer to a desired level. Once again, you can turn the light on or off by
touching anywhere in the middle along the LED indicators. LEDs will illuminate to indicate
proportional light intensity.
Step 6(A):
Manual Dimmer operations - Touch Dimmer
Step 6(B):
Manual Dimmer operations - Multi Dimmer
Dimmer can be operated by touching the circular portion of the LCD

brightness level and illuminate your lights (multiple room lights) to the
previous setting.
If you want to change brightness level slide thumb on touch panel in the
clockwise direction to increase or decrease brightness. Once again turn light
on or off by touching screen panel anywhere preferably in the center area.
Group icon screen controls all lights in a single group. To operate the multi-dimmer for
control of light in other rooms such as kitchen, family room and living room, swipe the
fingers from right to left or left to right and control individual lights as show below.
Right
Left
Brightness control (50%)
OFF ON