Installation Guide

3
ENGLISH
Traditional Collection Series B
Robe Hook 1 2 2 1 1
Paper Holder 1 2 2 1 1
Towel Bar 2 4 4 2 1
Towel Ring 1 2 2 1 1
TOOLS YOU WILL NEED
Drill
Phillips
Screwdriver
Pencil
Level
Tape
Measure
BEFORE INSTALLATION
Check to make sure you have the following parts indicated below:
INSTALLATION PROCEDURE
1. Using the towel bar as a template, mark the center locations of each
post.
2. Center a mounting disc over each of the marks from step 1 and mark
the locations for the screws.
3. Choose your installation method.
NOTE: These accessories work best if secured to a wall stud or stringer
using the supplied screws.
For Drywall:
• Drill a hole at each marked location.
• Insert anchors until they are flush with the face of the finished wall.
• Place the mounting bracket over the drywall anchors, insert the
screws and tighten to secure them.