Dimensions Guide

TEU1UA
ECOPOWER
®
Ultra High-Efficiency Urinal Flush Valve, 0.125 GPF
#SS-01168, v.03
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
• Material Bronze casting
• Power supply ECOPOWER
• Sensor detection time Factory setting at six
(6) seconds minimum
• Sensor detection range Self-adjusting to
environment
• Discharge quantity Preset to 0.125GPF/
0.47 LPF
• Operating temperature 32°-104°F (0°-40°C)
• Water supply pressure 15 psi - 125 psi*
• Water supply connection 3/4" NPT
• Warranty Three year limited
Min. 2-1/4"
(57mm)
Inlet supply
3/4” NPT
Inlet supply
3/4” NPT
4-9/16”
(115mm)
4-1/4"
(108mm)
3-3/16”
(81mm)
4-3/4”±1/2”
(120±13mm)
* 11-1/2”
(292mm)
7”
(178mm)
* Check local codes
1-1/2”
NPSM
TET1GA, TET1LA
TEU1GA, TEU1LA
TEU1LA
33-1/2"
(850mm)
15°
Max 19-11/16”
(Max 500mm)
DIAGRAM
*Water pressures over 80 psi are not recommended for most plumbing
fixtures. Check your local plumbing code for details.
INSTALLATION NOTES
For commercial applications only.
Warning: Failure to properly adjust angle stop to
the appropriate level can potentially cause property
damage.
For detailed installation instructions, please refer to
the installation manual.
Max flow rate to be used with
TEU1UA___________: 0.125 GPF
Confirm with local codes and standards for floor drain
requirement. Adjust control stop for proper flow rate
to the fixture.