Installation Sheet

SPECIFICATIONS
1"NPT 3/4"NPT
1-1/4"NPSM
1-1/2"NPSM
7 psi (48 kPa)
Flush Valve type bowl
Wash down flush
Automatic flush every
24 hours of non-use
Model Number
Figure
Control stop inlet
Flush Valve inlet
Flush Valve outlet
Supply water
pressure
Shutoff pressure
Rated Flush Volume
28 psi (196kPa)
(factory set)
Toilet/Urinal type
Trap seal protection
TET1GA
TET6GA
TET1LA
TET6LA
TEU1LA
Toilet Urinal
TEU1GA
Min
Max*
15 psi
(103 kPa)
(Flowing)
15 psi (103 kPa)
125 psi
(862 kPa)
125 psi (862 kPa)
125 psi
(862 kPa)
35 psi
(241 kPa)
1.6 G (6 L) 1.28 G (4.8 L)
0.5 G (1.9L)
1.0 G (3.8 L)
fuzzy logic
adj. flush vol.
0.5 G (1.9 L)
Automatic flush every
12 hours of non-use
TEU1UA
0.125 G (0.47 L)
* Water pressures over 80 psi are not recommended for most plumbing fixtures.
NOTE:
32-104˚F (0-40˚C)
34-104˚F (1-40˚C)
Detection range
from the front
7" (H) x 4-9/16"(W) x 3-3/16"(D)
(178 mm (H) x 115 mm (W) x 81 mm (D))
Dimension of cover
Detection time
Ambient temperature
Water temperature
Within 33-1/2" (850 mm)
6 seconds
The type of fixture determines the minimum pressure required for the valve. Consult
fixture manufacturer for the pressure requirement. TET6LA and TET6GA require 24" OR
LONGER vacuum breakers. The valve will not have the proper detection range if you
use a shorter vacuum breaker.
typical flush vol.
(Static)
ENGLISH
4