Installation Sheet

FEATURES
Fully Automatic and Hygienic
The EcoPower Flush Valve uses an infrared sensor to detect the user using and departing the
fixture, to provide an automatic flush of the fixture after a short delay. No manual operation is
required, improving the experience of use and hygiene of the fixture.
System Protection Timer
When the fixture is not used for 24 hours for toilet or 12 hours for urinal the protection
timer commands the system to flush in order to maintain the trap seal.
Manual Functionality
For maintenance and emergency use, the EcoPower Flush Valve is equipped with a manual
flushing button.
Green Features
Conserves Power
The flushing of the fixture activates a hydropower generator which generates electric power for
the next flush. (See About TOTO’s Hydropower Generator)
Conserves Water
Two functions help the EcoPower Flush Valve conserve water:
Fuzzy Logic Control
The EcoPower Flush Valve can sense how often and how long the fixture has been used to
deliver the correct amount of water. (See About Fuzzy Logic Control)
Anti Consecutive Flushing
The EcoPower Flush Valve offers water saving consecutive flush prevention. After a flush, the
valve will not automatically flush again for 10 seconds for urinals and 30 seconds for toilets.
COMMON TOOLS NEEDED
TOTO EcoPower Flush Valves are designed to work for 10 years, under normal conditions,
with no minimum usage required.
Screwdrivers (Phillips and Slotted )
Adjustable wrench
CARE & CLEANING
IMPORTANT! Do not scratch the sensor when cleaning.
ENGLISH
3
Avoid using any cleaning materials that may scratch the surface.
Never use polishing powder, detergent that includes coarse particles, thinners,
benzene, acids, alkaline detergents, or nylon scrub brushes.
To safely clean the surface, wipe it using a dampened soft cloth with diluted
dishwashing detergent and dry it with another soft cloth. If this does not adequately
clean the surface, wipe the area with a neutral detergent and wet cloth.
Offset pipe wrench