Installation Guide

SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF
• Flush System Tornado Flush
TM
• Min. Water Pressure 8 psi (flowing)
• Water Surface 7-1/8" x 9-1/8"
• Trap Diameter 2-1/8"
• Rough-in 12"
• Trap Seal 2-1/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight CST634CEFGT20 104lbs.
SW584T20 13.5lbs.
• Shipping Dimensions CST634CEFGT20
29-1/2" L x 18"W
x 19-1/4" H
1
x 27-1/8" H
2
SW584T20
23"X 19-1/4" X 5-1/2"
• See Spec sheet SW584T20 for Washlet details
MS634584CEFG
Supreme
®
II Connect+™ Toilet, 1.28GPF with Washlet
®
S350e Connect+
SS-01138 v.02
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
These dimensions and specications are subject to change without notice
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
12" (305mm)
*8" (203mm)
9-13/16"
(249mm)
*6" (152mm)
17-3/8"
(441mm)
25-9/16"
(650mm)
28-5/16" (720mm)
3/4" (19mm)
17-1/2" (445mm)
5-1/2" (140mm)
*SUGGESTED
DIMENSIONS
4 1/2 [117mm]
2 3/8
Diameter
12" (305mm)
*8" (203mm)
9-13/16"
(249mm)
*6" (152mm)
17-3/8"
(441mm)
25-9/16"
(650mm)
28-5/16" (720mm)
3/4" (19mm)
17-1/2" (445mm)
5-1/2" (140mm)
*SUGGESTED
DIMENSIONS
4 1/2 [117mm]
2 3/8
Diameter
* The 3-prong cord on the Washlet is on
the left side and is 3' long. The GFCI outlet
needs to have 120V, 10amps.
* GFCI Outlet
Min. 12” off floor
15-5/16"
(389mm)
18-7/8" (480mm)
(Round)
20-3/4" (529mm)
(Elongated)
3-15/16"
(100mm)
3/8"
(10mm)
1-5/8"
(42mm)
5-1/2"
(140mm)
7-1/16"
(180mm)
2-1/2"
(63mm)
7/8"
(22mm)
* The 3-prong cord on the Washlet is on
the left side and is 3' long. The GFCI outlet
needs to have 120V, 10amps.
* GFCI Outlet
Min. 12” off floor
15-5/16"
(389mm)
18-7/8" (480mm)
(Round)
20-3/4" (529mm)
(Elongated)
3-15/16"
(100mm)
3/8"
(10mm)
1-5/8"
(42mm)
5-1/2"
(140mm)
7-1/16"
(180mm)
2-1/2"
(63mm)
7/8"
(22mm)