Full Product Manual

ENGLISH

INSTALLATION PROCEDURE

1) Cut the template out along the inside of the cutting line.

2) Place the template on the countertop, making sure there is enough clearance for

the faucet and trim and for the cabinet beneath the countertop.

3) Trace around the template, marking the center line of the faucet and the location

of the mounting screw.

4) Cut out the opening along the traced template line.

NOTE: A minimum counter thickness of 1” (25.4mm) is required for the provided

installation hardware.

WARNINGS

WARNING

When this symbol appears in the manual, it is alerting you of

potential misoperations that may cause personal injury and/or

property damage.

INCLUDED PARTS

Under Counter Lavatory

Under Counter Mounting Set

- Standard Rim

Under Counter Mounting Set

- Tall Rim

For Marble/Stone Countertops:

a) Carefully turn the counter up-

side down and mark the anchor

locations using the template.

b) Drill the anchor holes at the

marked locations and set the

anchors into the countertop

using a setting tool and ham-

mer.

Anchor

Sealant

Metal

Bracket

Machine

Screw