Specification Sheet

HDR111#SS
Clean Dry™ High Speed Hand Dryer
# SS-01067 v. 02
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
ROUGH-IN
These dimensions and specifications are subject to change without notice.
• Warranty One Year Warranty
• Power Connection Hardwired
• Power Rating 120V AC,3.3Amps, 60 Hz,
390 W
• Power Saving Function Automatically turns OFF when
hands are removed or after 60
seconds of use
• Air Speed 221 mph
• Water Tray Capacity 0.22 gal (850 ml)
• Unit Size 12-5/8" x 6-1/2" x 22-5/8"
(320mm x 164mm x 575mm)
• Unit Weight 16.7 lb (7.6 kg)
• Operating Temperature 32F°-113F° (0C°-45C°)
• Shipping Size 27-1/8" x 15-3/4" x 8-13/16"
(690mm x 398mm x 223mm)
• Shipping Weight 22.7lb (10.3kg)
INSTALLATION NOTES
Meets the American Disabilities Act Guidelines, ANSI
A117.1 and CSA B651 requirements when mounted
in a recessed wall where the front surface is not more
than 4” (102mm) from finished wall and mounting
height for U.S. is 48” (1219mm) max to blower
outlet from finished floor, and for Canada is 47-1/4”
(1200mm) max to blower outlet from finished floor.
Check local code requirements for additional
mounting height details.
Stringer/additional stud, internal dimension
H21-5/8" x W12" (H550 x W305mm)
greater than
23-5/8
”
(600mm)
12
“
(305mm)
21-5/8”
(550mm)
Additional stud
St ud
St
ud
Stringer
Stringer / Traverse / Tirante
Additional stud
Finish the wall with H21-5/8" x W12" (H550 x W305mm) aperture area.
greater than 5-3/8” (135mm)
21-5/8”
(550mm)
Finished Wall
Finished Floor
*
Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements
when mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and
for Canada is 47-1/4” (1200mm) max to blower outlet from floor.
Check local code requirements for additional mounting height details.
Recommended mounting bracket (lower) heights from floor are as follow:
For general users: 31-1/4”(795mm)
For users in wheel chairs: 23-7/8”(607mm)
For children: 21-1/2”(545mm)
Air blows
Soufflerie d’air
Corrientes de aire
*
The service entrance of the power line
of the main unit (x3)
6-1/2”
(164mm)
22-5/8
”
(575mm)
12-5/8”
(320mm)
12
”
(305mm)
(550mm)
21-5/8”
Stringer / Traverse / Tirante