Owner's Manual

Totemacoustic.com
The KIN Play Sound Bar does not decode surround effects so your TV, source, or
app must be set to PCM output in their respective audio menus. Consult their
manuals to ensure this important step is performed properly.
HDMI ARC from TV to KIN Play Sound bar
This simple connection in
many cases also allows the
TV remote to control the
volume of the Sound Bar.
Connect all sources to the
TV, then connect the HDMI
ARC from the TV to the HDMI ARC
on the Sound Bar.
All TVs, sources, apps, and manufacturers have their own designations and terms for their audio
settings. The following instructions may not use the identical terms of your components, but they
should be similar and help you get through the setup process.
Enter the SETTINGS section of your TV (or source or app).
Find and select the AUDIO section.
Enter the AUDIO section and look for a setting often labeled
as HDMI AUDIO FORMAT, AUDIO FORMAT, or something
similar.
Select the AUDIO FORMAT option.
Enter HDMI AUDIO FORMAT. It should give you the option of
BITSTREAM OR PCM.
Select the PCM option.
The TV/Source/App should be ready to send sound to the KIN
Play Sound Bar.
CONNECTIONS AND SETUP to TV