Owner's Manual

Totemacoustic.com
Description: Active Soundbar
Frequency Response: 60 Hz – 22 kHz ± 3 dB
Woofers: 4 x 4” Natural Hybrid
Tweeters: 2 x 1” Metal Alloy
Power: 150w total (75x2)
Analog Inputs: Stereo RCA, mini jack
Digital Inputs: Optical, Bluetooth 5.0, HDMI ARC
Bluetooth Sampling Rate: 8kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24kHz, 32kHz, 44.1 kHz, 48kHz
Optical In Sampling Rate: 192kHz/24bit
Decoding: MP2/3, WMA, FLAC(8/16/24bit), AAC/MP4/M4A, WAV(IMA-ADPCM and raw PCM), AIF, AIFC
Outputs: Subwoofer output 20-220Hz @ ±3dB
Dimensions (HxWxD): 152 x 1200 x115mm / 5.98 x 47.24 x 4.52”
Weight: 38 lb / 17.23kg
Accessories: Wall bracket, template, adhesive feet, remote, power cord
No Sound
• Sources must be set to stereo or PCM, not bitstream or a surround effect like Dolby or
DTS.
• Check to see if the MUTE setting has been engaged. If a connected source has its own volume,
verify it is on and raised to an audible level.
• Make sure the correct source has been selected.
• Verify that the system is powered up and properly connected.
No Power/No light in the LED:
• Verify the main power switch on the amp has been turned on.
• Verify that the wall AC outlet is functional.
• Check to see the power cord is securely connected.
Cannot connect to Bluetooth
• Ensure the Bluetooth input has been selected.
• Confirm the sound bar is in pairing mode, signified by Bluetooth blinking in the display
• On the Bluetooth device, turn the Bluetooth function on and off.
• If the device doesn’t find the speakers in pairing mode, turn the sound bar off and on again.
Remote Control Issues
• Confirm the transparent film separating the battery from the connections has been removed.
• Be sure that you are within range (approximately 30ft). Aim the remote at the active speaker.
• Replace the battery.
SPECIFICATIONS
TROUBLESHOOTING