Owner's Manual

Totemacoustic.com
The KIN Play Sound bar does not decode surround effects so your TV, source, or
app must be set to PCM output in their respective audio menus. Consult their
manuals to ensure this important step is performed properly.
Analog Audio Output from TV to Soundbar
All sources are connected directly to the TV. Connect the KIN Soundbar’s RCA (analog) input to the
TV’s stereo RCA analog
output. If the TV has two
sets of audio outputs
labeled as Fixed and
Variable, select Fixed. This
will let you turn your TV’s
speakers down or off while
the TV still supplies a
constant audio signal to the
Soundbar.
All sources connected directly to Sound Bar
All sources (Blu-
ray, Satellite, etc.)
can be connected
directly to the
Soundbar. Using
this method, you
will need to select
the proper video
input on your TV
to match sound.
If you are not getting any sound, you likely need to set your TV, source, or app
to PCM output in their audio menus.