Owner's Manual

9
totemacoustic.com
The KIN Play Tower does not decode surround effects so your TV, source, or
app must be set to PCM output in their respective audio menus. Consult their
manuals to ensure this important step is performed properly.
HDMI ARC from TV to KIN Play
Tower
This simple connection in many cases also allows the
TV remote to control the volume of the KIN Play
Tower. Connect all sources to the TV, then connect the
HDMI ARC from the TV to the HDMI ARC on the KIN Play
Tower.
All TVs, sources, apps, and manufacturers have their own designations and terms for their audio
settings. The following instructions may not use the identical terms of your components, but they
should be similar and help you get through the setup process.
Enter the SETTINGS section of your TV (or source or app).
Find and select the AUDIO section.
Enter the AUDIO section and look for a setting often labeled
as HDMI AUDIO FORMAT, AUDIO FORMAT, or something
similar.
Select the AUDIO FORMAT option.
Enter HDMI AUDIO FORMAT. It should give you the option of
BITSTREAM OR PCM.
Select the PCM option.
The TV/Source/App should be ready to send sound to the KIN
Play Tower.
CONNECTIONS AND SETUP to TV