Owner's Manual

totemacoustic.com

Turn on the KIN AMP and select the BLUETOOTH Input designated with the BLUETOOTH logo

on the remote. BLUETOOTH will appear in the display (see FIG 1).

Push Pair on the remote. PAIRING will appear briefly to indicate pairing mode (see FIG 2).

BLUETOOTH will reappear in the display, as in FIG 1, but will now be blinking.

Turn on your Bluetooth device, go to the Bluetooth settings, and let it find “Totem KIN AMP”/

Select the Totem KIN AMP option and wait for your device to say connected. (see FIG 3)

BLUETOOTH (FIG 1) will stop blinking and the KIN AMP will emit a beep, indicating the pairing

has been successful. You are ready to enjoy music wirelessly streamed via Bluetooth.

Turn on the KIN AMP and tap the input selector (indicated by the red

arrow in fig 1) until you reach the BLUETOOTH input. Hold your finger

on the input selector for three seconds until PAIRING is displayed.

Turn on your Bluetooth device, go to the Bluetooth settings, and let it

find “Totem KIN AMP”. Select the Totem KIN AMP option and wait for

your device to say connected. (see FIG 3)

BLUETOOTH (FIG 1) will stop blinking and the KIN AMP will emit a

beep, indicating the pairing has been successful. You are ready to

enjoy music wirelessly streamed via Bluetooth.

FIG 3

FIG 1

FIG 2

BLUETOOTH PAIRING USING THE REMOTE

BLUETOOTH PAIRING ON THE DISPLAY