Owner's Manual

totemacoustic.com

Remove the transparent tab located at the bottom of the remote to activate the battery.

Functions are listed below.

Always ensure that the power switch is off before making any connections.

Connect the speakers using speaker wire. Be sure to respect the polarity of the wire,

connecting the RED (+) and BLACK (-) terminals from the AMP to the speakers. Totem Tress

wire, at any length, can demonstrably enhance bass, clarity, and imaging. You are now ready

to connect your sources.

1. Power/Standby

2. Previous Track (Bluetooth operation only)

3. Play/Pause (Bluetooth operation only)

4. Bluetooth Input Select

5. Bluetooth Pairing

6. Aux 1 : RCA Input Select

7. Aux 2: Mini Jack Input Select

8. Raise and lower bass

9. Raise and lower treble

10. Mute

11. Next Track (Bluetooth operation only)

12. Optical Input Select

13. Reset: All tone settings are reset to original

factory settings

14.

Raise and lower volume

REMOTE CONTROL

SETTING UP THE KIN AMP