Owner's Manual

totemacoustic.com

• Remote

• Power Cord

When packaged as a system with Totem

speakers, accessories will also include:

• 2 x Speaker wire

• Optical cable

• 3.5mm cable

The Kin AMP display is touch capacitance. A gentle touch can control the volume and source

selection, and when in standby mode, a touch to these same areas can turn on the Amplifier.

The display disappears 1 minute after the last function from either the remote or touch display.

1. Main Display: Indicates Source or Volume, depending on which is being adjusted.

2. Input Selector: Scroll through the various inputs with individual touches on the blue

arrows. The input options are:

BLUETOOTH: The setting to pair a device to Bluetooth

OPTICAL: Digital Optical Input

RCA / AUX1: Analog stereo RCA input, switchable between Line and Phono

3.5 mini / AUX2: Analog stereo 3.5mm/Mini Jack input

3. Volume: Touch the left speaker icon to lower the volume and the right speaker icon to

raise the volume. The volume maximum is 60.

4. Totem Thunderbird Logo: Lights up when Power is on, disappears in standby.

5. Headphone Output: Accommodates 3.5mm headphone jacks. Inserting headphones will

mute the output to the speakers. Removing the jack will reengage out to the speakers.

When in standby mode, the display can be activated by pressing any function on the remote or

touching either the Input Selector or Volume sections of the display.

DISPLAY FUNCTIONS

ACCESSORIES INCLUDED