________________________________________ 15” LCD MONITOR CHAPTER 1 INTRODUCTION BEFORE INSTALLING YOUR MONITOR Read this manual cover to cover. PAY ATTENTION to all WARNING and CAUTIONS DO NOT use computer components not recommend by the manufacture Do not attempt to service the monitor your self. If a problem occurs, contact the manufacture's authorized service center ABOUT YOUR MONITOR This monitor is a microprocessor-controlled, color monitor that uses a TFT LCD panel.
15” LCD MONITOR _____________________________________ FACTORY-PRESET MODES Table 1 shows standard video mode setting that has been pre-adjusted at the factory for accurate video display. These setting are stored in the monitor's memory Table 1. Factory-Preset Modes PC mode Mode Resolution H-Freq.(KHz) NEC 640x400 24.83 31.47 VGA 640x350 31.47 720x400 31.47 640x480 37.86 640x480 37.5 640x480 35.16 SVGA 800x600 37.88 800x600 48.08 800x600 46.87 800x600 48.36 XGA 1024x768 56.
________________________________________ 15” LCD MONITOR SPECIFICATIONS LCD-1510V 15” LCD Monitor Overall Dimension (HxWxD): Effective Display area (H/V): Display colors: Scan Frequencies: Horizontal Vertical Viewing Angle: Number of Pixels: Pixel pitch: Picture Tube: Power: Input Consumption PC RGB Connector: Audio connector Speaker RGB Signals: Video Sync Display Data Channel: Compatibility Video connector Input S-connector AV connector Mini D type BNC connector Video Connector output 404 x 393 x 16
15” LCD MONITOR _____________________________________ BNC connector Operations: User Controls On Screen Display Control Type: Compatibility: Environmental Limits: Operating Temp x 1 (Composite Video Out) On/Off Power Button +/- and Up/down keys Auto adjustment, Brightness, contrast color temperature, Hue, Tint, Source select, PIP setup H-position, V-position, OSD position Audio volume, bass, treble, mute Load default Digital IBM and compatible, Apple Macintosh, NEC 32° to 103°F ( 0° to 40°C ) Storage Tem
__________________________________ 15”/17”/19” LCD MONITOR Auto adjustment Automatically adjusts the phase and position of the LCD monitor for the best view setting Color temperature setting provide 9300K, user mode, and 6500K option Brightness adjustment Let user adjust the brightness. The range if from 0 to 99 .
”/17”/19” LCD MONITOR _____________________________________ Color balance: the monitor do the white balance automatically.
__________________________________ 15”/17”/19” LCD MONITOR original one. Set as 1, it is 1/8 of original size. Contrast: Adjust the contrast value of PIP screen. The range is from 0 to 127. Intensity: Adjust the intensity value of PIP screen. The range is from 0to 255 Tint: Adjust the Tine value of PIP screen. The range is from 0 to 255 Hue: Adjust the Hue value of PIP screen.
15”/17”/19” LCD MONITOR _____________________________________ CHAPTER 4 VIDEO ADJUSTMENT Video OSD Screen NTSC 15.7K 60.2 Brightness - Adjustment + 49 VER XGA-KDC45-5100 1. Each time, when pressing the menu key , the screen will show as above. You can see the mark, that means the selected item Then you can change the setting through + or -.key. 2. Pressing Sel key to move the arrow down or up. If the selected item has many option to choose, press – or + to enter into the sub-menu. 3.
__________________________________ 15”/17”/19” LCD MONITOR Brightness adjustment Adjust the screen brightness value. The range if from 0 to 99. Contrast adjustment Adjust the screen contrast value. The range is from 0 to 127 Intensity adjustment Adjust the screen intensity value. The range is from 0 to 255 Tint adjustment Adjust the screen Tint value. The range is from 0 to 127 Hue adjustment Adjust the screen Hue value.
