- ToteVision OWNER'S MANUAL

9. Optional DVDSystem Adcvanced Functions:

p.26

Password:

The Password item is used to set the new password or change the

old password. Before enter the item, the system will request to input

OLDPASSWORDfirst. After press ENTER,the system will request to

input NEWPASSWORD,after input new password, the system will

request to VERIFYthe new password again. Then press ENTERto save

setting. The OSDMenu will change as below chart:

.PasswordSetting .EnterPassword

------------------------------------------------------_.

·EnterNewPassword .VerifyPassword

-------------------------------------------------------.

III

---

9. Optional DVDSystem Adcvanced Functions:

p.27

Country Code:

Country code item is used to set the national code. It is a prerequisite

that the setting of the parental control level is only valid when the

country code of the unit is matched with that of the disc. Country code

item provides two alphabetical letters for changes.

Before user can enter into the country code item, the system will request

to input the passwordfirst. The country code can be changed only after

the passwordis input successfully.

PressUp< ... >jDown< ... > to select the first letter. And press Right to

move the highlight. PressUp< ...>jDown< ... > again to select the second

letter. Then press ENTERto confirm the selection of the country code.

The OSDMenuwill change as below chart:

.CountryCodeSetting

·EnterNewPassword

.ChangeNewLetter