TFT LCD COLOR MONITOR User’s manual Model：LCD-1513VB 15.1〞 Model：LCD-1513TS 15.1〞 R ○ 1319 Dexter Avenue N.
Multilingual User’s Manual： FCC Notice This equipment has been tested and found to comply with the limits for FCC class B. Trademarks Trademarks are the rights of their respective owners. 1.Introduction Product Description ………………………… Package Contents……………………………… Product Features……………………………… Cleaning………………………………………… Page.2 Page.2 Page.2 Page.3 2. Control Function OSD Button ……………………………………… OSD Control……………………………………… Page.4 Page.6 3.
Introduction Product Description Congratulations on purchasing the next generation of LCD monitor display! This state-of-the-art high brightness LCD monitor incorporates high quality display into a small light weighted module. It has power-saving capabilities and emits no harmful X-ray radiation.
Control Function 4.OSD Menu / Select：Pressing this button pops up the OSD menus on the screen, and used to select the OSD control options on the screen. Control Button Front View 5.Increase：This button is used to adjust the increasing value of selected OSD control option. 6.Decrease：This button is used to adjust the decreasing value of selected OSD control option. 3.Power LED 6.Decrease 4.OSD Menu / Select 5.Increase 2.Earphone 1.Power Switch 1.
OSD Tools Menu： Monitor Function Selection Menu： Input AV1: 1st Video-out connector of any image resource Auto Adjust：Select this function can make the monitor have best efficiency。 Input AV2：2nd Video-out connector of any image resource Brightness：Adjust the brightness using ＋ and － buttons.
RGB Adjusting Menu： OSD Function Selection Menu： Red：Red Range Exit OSD：Exit the OSD function selection menu. Green：Green Range OSD Horizontal Position：Pressing ＋ moves the OSD menu to right; Pressing － Blue：Blue Range moves the OSD menu to left OSD Vertical Position：Pressing ＋ moves the OSD menu upward; Pressing － moves the OSD menu downward OSD Time Out：Set the OSD time Moiré Adjust：Set panel moiré degrees and noise. Page.8 Page.
Inputs Diagram Precautions Inputs 【1】 【2】 【3】 【4】 【5】【6】 【7】 【8】 【1】AUDIO1：This can be connected to the 1st audio-out connector of any sound resource. 【2】AUDIO2：This can be connected to the 2nd audio-out connector of any sound resource. 【3】LINE IN：This can be connected to the 3rd audio-out connector of any sound resource. 【4】DC IN：This is for connecting the power cable. 【5】VIDEO1：This can be connected to the 1st video-out connector of any video resource.
Do not locate this product where persons will walk on the cord. Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany. z Do not overload wall outlets or power cords.
Display Modes Product Specification Type Spec PC SPEAKER AV LCD Display 15” active matrix TFT LCD panel Pixel Pitch 0.297(H) x 0.297(V) mm Max. Resolution 1024(H) x 768(V) XGA Set Size 418(H) x 399(V) x 201(D) mm Pack Size 480(H) x 450(V) x 230(D) mm Contrast Ratio 150:1~400:1 Brightness 500 ~ 1000 cd/m2 Response Time 20~50ms Display Color 16.777 M View Angle L+/R±60°~±80° U+/D±50°~±60° Pc Interface RGB analog 0.7V peak to peak Video Sync.
Service Information Appendices Service Please review the warranty information located on the back of the Quick Start Guide or Troubleshooting If you are experiencing trouble with your LCD display, please refer to the following. If the problem persists, please contact your local dealer or our service center. Note: For best viewing image effect, please set resolution at 1024x768 contact your local authorized distributor/retailer.
