Installation Guide

Table Of Contents

PAGE 1
Reva LED Shoe box Light Instruction Cautions: 1. Can not use the electric generator to test the LED lamp. 2. Please abide by related country, regional and local law and regulations when install this fixture. 3. To avoid electrical shock and damage, please do not install the lights ingraining days. Notices: 1. To prevent from electric shock or fire risk, the installation must be conducted by operator who have professional electrical knowledge. 2. Please wear gloves to avoid Injury before Installing lamps. 3.
PAGE 2
4. ADJUSTABLE FITTER MOUNTING & DIRECT MOUNTING (TYPE D} 4.1 ADJUSTABLE FITTER MOUNTING Step 1: Remove the spare parts from A&D bracket. (Figure 17). Step 2: Loosen the four bolts on ASD bracket, connect the wires correctly, and pull the wires Into the poles. (Figure 18) Step 3: Place the bracket into the pole and lock the four bolts. (Figure 18) Notice: Adjustable angle Is 18) Figure 17 Figure 18 4.