Technical Specifications

product data
Mesh Types and Uses
In all cases, the Total Wall Re-
inforcing Meshes are used in
the Base Coat layer of lamina.
The type of Reinforcing Mesh
used and the number of lay-
ers of Reinforcing Mesh and
Base Coat employed is de-
termined by job factors such
as the desired impact resis-
tance of the wall, the type of
system being installed and
the various system details.
Runs of Standard, Enhanced
and Intermediate Meshes are
lapped a minimum of 2.5”.
Runs of High and Ultra High
Meshes are butted and then
covered with a layer of Stan-
dard Mesh.
Type PB Soft Coat EIFS
Reinforcing Meshes
1. Standard Mesh - this
mesh is used on a majority
of applications. This weight
mesh is available in dierent
width rolls for walls and in
narrow width rolls for detail
work. It is also available in a
self-sticking version for spe-
cial situations (see Coverage’s
for a full listing of sizes). This
mesh has a weight of ~ 4.3
ounces per yard, a thickness
of 10.7 mils and a relative
impact resistance of 25-35
in-lbs.
2. Enhanced Mesh - used
to provide about 25% higher
impact resistance relative to
Standard Mesh. This mesh
has a weight of ~ 6 ounces
per yard, a thickness of 11.0
mils and a relative impact
resistance of 35-45 in-lbs.
3. Intermediate Mesh -
used to provide more than
200% impact resistance rela-
tive to Standard Mesh. This
mesh has a weight of ~ 11
ounces per yard, a thickness
of 19.0 mils and a relative
impact resistance of 75-95
in-lbs.
4. High Impact Mesh -
used to provide more than
600% higher impact resis-
tance relative to Standard
Mesh. This mesh has a
weight of ~ 15 ounces per
yard, a thickness of 26.0 mils
and a relative impact resis-
tance of 180-220 in-lbs.
5. Ultra High Impact
Mesh - used to provide
about 800% higher impact
resistance relative to Stan-
dard Mesh. This mesh has a
weight of ~ 20 ounces per
yard, a thickness of 30.0 mils
and a relative impact resis-
tance of 230-240 in-lbs.
Type PM Hard Coat
EIFS Reinforcing Mesh
1. Total Wall Hard Coat
Mesh - this mesh is used on
all Hard Coat PM applica-
tions. Total Wall Hard Coat
mesh has a weight of 4.5
ounces per square yard, Ten-
sile - warp 160 lbs/in, weft
Type - Coated EC Fiberglass Mesh
Weave - Leno
Coating - Meets EIMA Std.105.01 for Alkali Resistance
Technical Data
250 lbs/in.
Availability
Net Weight 50 pound per
Total Wall
888.702.9915 Phone
888.702.9916 Fax
www.totalwall.com