Instructions / Assembly

ManualsBrandsTotal Pond ManualsFountain Pumps300 GPH Fountain Pump

ITEM # MD11300

Submersible Fountain Pump

300 Gallons Per Hour

PACKAGE CONTENTS

WARNINGS AND CAUTIONS

WARNING

• Risk of electrical shock. This pump is supplied with a grounding conductor and grounding–type

attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly

grounded, grounding- ty

pe receptacle.

• Do not exceed the voltage shown on the pump.

• Always disconnect pump from the power source before beginning any maintenance or work on the

pump.

• Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly i

damage is found.

• Do

not remove the grounding pin from the power cord plug.

• To reduce the risk of electric shock, use only on portable, self-contained fountains no larger than 5 ft. i

any dimension.

• Ri

sk of electrical shock – This pump has not been investigated for use in swimming pool or marine

areas.

CAUTION

• This pump has been evaluated for use with fresh water only.

• Use a proper power source as indicated on the pump label.

• Keep the cord away from high temperatures or other heat sources.

• Do not pump heated liquids.

• Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.

• Do not lift the pump by its power cord.

Part

Description

Quantity

Pump

1/2 in. ID tubing adapter

3/4 in. ID tubing adapter

Questions, problems, missing parts? Before returning

to your retailer, call our customer service department at

1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@geoglobalpartners.com. Or

visit our website www.totalpond.com.

REMINDER

CALL 1-888-412-6001

BEFORE RETURNING TO STORE.

Summary of content (4 pages)

PAGE 1
ITEM # MD11300 Submersible Fountain Pump 300 Gallons Per Hour REMINDER CALL 1-888-412-6001 BEFORE RETURNING TO STORE. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@geoglobalpartners.com. Or visit our website www.totalpond.com. PACKAGE CONTENTS Part A B C Description Pump 1/2 in. ID tubing adapter 3/4 in.
PAGE 2
PREPARATION Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. • Estimated Assembly Time: 5 minutes • No tools required for assembly. ASSEMBLY INSTRUCTIONS 1. Connect tubing to the outlet of the pump with the appropriate adapter. Fig.
PAGE 3
TROUBLESHOOTING If the pump fails to operate: • Check to make sure the power cord is plugged in and the pump is getting power. • Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions. • Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller. Turn the impeller to ensure that it is not broken or jammed.
PAGE 4
LIMITED WARRANTY All pumps and electrical products are warranted to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser. TotalPond® pond and waterfall pumps are warranted to the user against defective material and workmanship, under normal working conditions for 2 years from the date of purchase.