Use and Care Manual
INTRODUCTION AUX BOUTONS DE LA TÉLÉCOMMANDE
Introduction for buttons on remote control
Appuyez sur ce bouton pour activer/désactiver la fonction santé et balayage durant
que l'unité est en marche. Appuyez le bouton 1 fois pour activer la fonction balayage;
le tableau d'affichage affichera . Appuyez sur le bouton une seconde fois pour
activer la fonction santé et balayage simultanément; le tableau d'affichage affichera
et . Appuyez sur le bouton une troisième fois pour arrêter les fonction
santé et balayage simultanément. Appuyez sur le bouton une quatrième fois pour
activer la fonction santé; le tableau d'affichage affichera . Appuyez sur ce bouton
de nouveau pour répéter la séquence. (Cette fonction est disponible seulement sur
quelques modèles)
Appuyez sur les boutons et simultanément pour vérouiller et dévérouiller le
clavier. Si la télécommande est vérouillé, est affiché. Dans ce cas, si vous
appuyez sur n'importe quel bouton, clignotera 3 fois.
Lorsque l'unité en arrêt, appuyez sur le bouton MODE et simultanément pour
changer entre °C et °F.
Appuyez sur les boutons MODE et TURBO simultanément pour activer et désactiver
la fonction Wi-Fi. Lorsque la fonction Wi-Fi est activé, l'icône Wi-Fi sera affiché sur la
télécommande; Appuyez sur les boutons MODE et TURBO simultanément pendant
10 secondes pour que la télécommande envoie le code de réinitialisation Wi-Fi et par
la suite la fonction Wi-Fi sera activé. La fonction Wi-Fi est activé par défaut lorsque la
télécommande est mise sous tension.
1. Après que la machine à accès à du courant électrique, appuyez sur le bouton <<ON/OFF>>
sur la télécommande pour mettre en marche l'air climatisé.
2. Appuyez sur le bouton MODE pour sélectionner l'utilisation désirée: AUTO, COOL,
DRY, FAN, HEAT.
3. Appuyez sur le bouton et pour choisir la température fixée désirée. (La température
ne peut être ajustée en mode AUTO).
4. Appuyez sur le bouton FAN pour sélectionner la vitesse du ventilateur désirée: vitesse
automatique, faible, moyenne, élevée.
5. Appuyez sur le bouton SWING pour sélectionner l'angle d'émission du courant d'air.
Bouton Temp
15
/
/
/
/
/
Introduction des fonctions pour les combinaisons de boutons
Combinaison des boutons et : Concernant le vérouillage
Fonction WIFI
Guide d'opération
Combinaison des boutons MODE et : Concernant
le changement de Fahrenheit et Celsius.
/
/
/
/
/
/
/
/
/
/
Press this button to achieve the on and off of healthy and scavenging functions in
operation status. Press this button for the first time to start scavenging function; LCD
displays . Press the button for the second time to start healthy and scavenging
functions simultaneously; LCD displays and . Press this button for the
third time to quit healthy and scavenging functions simultaneously. Press the button
for the fourth time to start healthy function; LCD display . Press this button again
to repeat the operation above. (This function is applicable to partial of models)
Note: scavenging function is not available,only some models have healthy function.
Press and buttons simultaneously to lock or unlock the keypad. If the remote
controller is locked, is displayed. In this case, pressing any button, blinks
three times.
At unit OFF, press "MODE" and buttons simultaneously to switch between °C and °F.
Press "MODE" and "TURBO" button simultaneously to tum on or tum off WIFI
function. When WIFI function is turned on, the" Wifi" icon will be displayed on
remote controller; Long press "MODE" and "TURBO" buttons simultaneously for
10s, remote controller will send WIFI reset code and then the WIFI function will be
turned on. WIFI function is defaulted ON after energization of the remote controller.
1. After putting through the power, press "ON/OFF" button on remote controller to
turn on the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN,
HEAT.
3. Press or button to set your required temperature. (Temperature can't
be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high
speed.
5. Press "SWING" button to select fan blowing angle.
Temp button
15
/
/
/
/
/
Function introduction for combination buttons
Combination of and buttons: About lock)
WIFI Function
Operation guide
Combination of "MODE" and buttons:
About switch between Fahrenheit and centigrade
/
/
/
/
/
/
/
/
/
/