Use and Care Manual

INTRODUCTION AUX BOUTONS DE LA TÉLÉCOMMANDE
INTRODUCTION FOR BUTTONS ON REMOTE CONTROL
En appuyant sur ce bouton, vous pouvez voir la température intérieure fixée, la
tempétature ambiente à l'intérieur sur l'écran d'affichage de l'unité. Le sélectionne-
ment avec la télécommande se fait selon la séquence suivante:
Appuyez sur ce bouton pour activer / désactiver la fonction Turbo. Cette fonction
vous permet d'atteindre la température choisi le plus rapidement possible. En mode
COOL, l'unité émettra un courant d'air refroidissant puissant à l'aide du ventilateur à
vitesse élevée. En mode HEAT, l'unité émettra un courant d'air chaud puissant à l'ai-
de du ventilateur à vitesse élevée.
Note: Si votre unité ne comprends pas cette fonction, lorsque vous appuyerez sur
cette touche, l'unité émettra un <<clic>>, mais continuera tout de même à fonctionner
à l'état d'origine.
En sélectionnant avec votre télécommande, la température indiquée sur le
tableau d'affichage de l'unité affichera la température fixée; En sélectionnant avec
votre télécommande, la température indiquée sur le tableau d'affichage de l'unité
affichera la température ambiante intérieure; 3 secondes plus tard ou si vous
appuyez sur un nouveau bouton sur votre télécommande, le tableau d'affichage
retournera à afficher la température fixée.
Caution:
• Ce modèle n'a pas la fonction d'affichage de la température ambiante extérieure.
Lorsque vous sélectionnez , l'unité continuera d'afficher la température fixée.
• L'unité est programmé à afficher la température fixée par défault lorsque l'unité est
mise en marche.
• Ceci s'applique seulement aux modèles qui ont l'indicateur de température inclus.
Bouton Temp
11
Bouton Turbo
12
Appuyez sur ce bouton pour activer la fonction I-Feel. Cette fonction permet de lire la
température ambiante intérieure autour de votre télécommande au lieu d'autour de
votre unité. Appuyez sur le bouton de nouveau pour canceller la fonction I-Feel.
Note: Si votre unité ne comprends pas cette fonction, lorsque vous appuyerez sur
cette touche, l'unité émettra un <<clic>>, mais continuera tout de même à
fonctionner à l'état d'origine.
Bouton IFell
14
Fonction X-FAN: En mode COOL ou DRY, l'icône est affiché et le ventilateur à l'in-
térieur de l'unité continuera de fonctionner pour 2 minutes pour sècher l'unité, même
si vous avez arrêté votre unité. Lorsque l'unité est mise sous tension, la fonction X-
FAN n'est pas activé par défaut. La fonction X-FAN n'est pas disponible en mode
AUTO, FAN ou HEAT.
fonction: Appuyez sur ce bouton pour allumez la lumière sur le tableau d'afficha-
ge et appuyez sur ce bouton de nouveau pour l'éteindre. Si la lumière est allumez,
*icône de lumière* est affiché. Si la lumière est éteinte, *icône de lumière*
disparaît.
Bouton X-Fan
13
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
Press this button, you can see indoor set temperature, indoor ambient temperature
on the unit display. The setting on remote controller is selected circularly as below:
Press this button to activate I deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow
strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong
heating air at super high fan speed.
Note: There is no this function for the units. If press this key, the main unit will
click, but it also runs under original status.
When selecting " " II with remote controller or no display, temperature indicator on
the unit displays set temperature; When selecting with remote controller,
temperature indicator on the unit displays indoor ambient temperature; 3s later or
within 3s it receives other remote controller signal that will return to display the set-
ting temperature.
Caution:
• This model hasn't outdoor ambient temperature display function. While remote
controller can operate " " and ithe unit displays set temperature.
• It's defaulted to display set temperature when turning on the unit.
• Only for the models with temperature indicator on the unit.
Temp button
11
Turbo button
12
Press this button to turn on I FEEL function. The unit automatically adjust
temperature according to the sensed temperature. Press this button again to cancel
I FEEL function.
Note: There is no this function for the units. If press this key, the main unit will
click, but it also runs under original status.
IFell button
14
X-FAN function: In COOL or DRY mode, the icon is displayed and the indoor fan
will continue operation for 2 minutes in order to dry the the unit even though you
have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
function: tum on the display's light and press this button again to tum off the
display's light. If the light is turned on, is displayed. If the light is turned off,
disappears.
X-Fan button
13
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
" "
no display
Pas dʼaffichage

