TOOT User Manual Portable Alr Conditioner Bafflers using your TOOT Portable Alr Conditioner please read this user manual in its entirely.
OUTTA Welcome to the TOOT Direct Family! Ware extremely happy fo welcome you as 8 new member of our family! Please read the tips below before using your product for the first me. Tips for First-Time Use 1. The portable air conditioner is a heavy object, which needs two or more people to [iit and install. Failure to do 20 outdid result in injury or other accidents. 2. Allow the unit to sit upright for at least 3-4 hours before powering on.
ET Ed Safety and Instructions o1 installation and Setup 01 Electrical Safety Warning oom memento eon 02 Parts Resorption — eee 05 Operation Control Panel Remote Control 08 Combination Buttons 10 Replacing the Batteries romeo installation Tools Required -— Parts List installing Your AC installing the Exhaust Hose -18 Removing Collected Water 18 installing the Power Cord Hooks mmm 21 Cleaning and Maintenance 22 Troubleshooting 24 Malfunction Codes memes 25 Unwarrantable Support 26
Please read all instructions before use and sacs this user manual for future reference. A digital version can be obtained from Customer Support. Your safety and the safety of others are very important fo us. We have provided many Important safely messages throughout this manual and on the appliance itself. Always read and follow sll posted safely messages. To reduce the risk of fire, electric shock, injury, or death to persons using or near this appliance, please follow some basic safely precautions.
« Only use the appliance in an upright position. Make sure the angle of Inclination «10°. Always place the appliance on a stable, flat, lava! surface fo proven the air conditioner from overturning. Electrical Safety Warning # If the power cable is damaged, it must be replaced by the manufacturer or an authorized technical service center in order to avoid all risk. = Do not damage, alter, excessively bend, twist, pull or heat the power cord & Do not cover the power cord with a8 rug or carpeting.
LCD Power Plug (Leakage Current Detection and Interruption) The power cord used with this air conditioner contains a current detection device designed to reduce the risk of fire. In the scent that the power supply cord is damaged, lf cannot be repaired. The power supply cord must be replaced with a replacement cord received from the manufacturer by a trained sarnies technician.
« Open space around the sir conditioner should be al slats 12 inches (30cm) to ensure airflow. « Please keep the air inlet and air outlet clean and fare from obstacles. » During operation, close doors and windows to improve the cooling effect in the room. © Please put the air conditioner on smooth and flat ground to avoid noise and lL Zo a 30em{12") » Avoid direct sunlight exposure. 20em(12°) | pp + Nets: The following locations or conditions may cause malfunction or damage fo your sir conditioner.
Parts Description 's & Control Panel é@ Vertical Airflow Louver e Horizontal Airflow Louver & Caster Wheals @ Ar intake €3 Joint [7] Exhaust Hose © Rear Clip © Power Cord Qo Power Cord Hooks Remote Control This picture is only for reference. Please refer io the actual product for the appearance.
ele Button {3 ON/OFF Button @ Fan Button @ Timer Button & Leap Button Oo Mods Butter Notes: « After powering the alr conditioner on, the sir conditioner wii emit a single beeping sound after powering on. After that, you can aerate the air conditions by using ihe cont! pans or remote. » The alr conditioner wil emit a beep after pressing each bunion on the central panel.
3 +Button ® Pressing this button will allow you to change the temperature eating. » After pressing the timer button, the bunions will adjust the timer setting from hours In Increments. After the 10-hour mark, the button will adjust the timer salting in 1-hour increments. it will take § seconds for the timer settings to be confirmed By the machine. Koch: This button is not valid under dry and fan model.
LOT t Ce ge] This is a universal remote control for a fearfully of models. if your model does not have a function listed on the remote control, there will be no changes in the operation of your unit. The max range of the remote control is 25 feet with no obstacles or interference from other devices, such as wireless phones or fluorescent lamps. The air conditioner will amt a baa sound if the signal from the remits has been received successfully.
€D ON/OFF Button Crass fo power the air conditioner OM or OFF. a Mode Button Pres this button fo cycle through the following modes. A corresponding logo indicator on the left side of the remote will be shown. a. Cool mode: standard cooling mode. The set temperature snd fan speed can both be adjusted. b. Dry mode: the unit will run on iow sped for humidification. The fan speed cannot be adjusted. ©. Fan Only mode: the air conditioner will not produce coo! air, any bio air from the outside.
© Sleep Button Cross this button to enter the sleep operation mode. While in sleep mods, you can only uss the Cool modes. When in sleep mods, the AC temperature will automatically increase by 2°F for first hour and 4°F for second hour and then will keep running with this temperature. oe Timer Button Rags this bunion fo activate the timer bunion. Use the bunions to adjust the length of the timer before the uni powers off. The time selling range is hours, in 85-hour increments.
Replacing the Batteries 1. Press the back side of the remote control battery cover and side out following the engraved snow. 2. Replace with two new batteries {nat included) of the same make and model. Make sure the polarities (+ & -} are aligned cover of battery box compactly. 3.
Accessory kit for window initialization x Exhaust ~ Dover Window panel J Rear Clip “2 DN Adjustment panel Mounting Piste Extension pans! Apexes Rain Guard Drain Hose Adapter Fixed Clip Bracket Foam Seal A Foam Seal B x apes {non adhesive} {adhesive type} Exposes Accessory kit for Installing the drain hose ® (J Drain Hose Drain Pips Clip Spring Clip Remote Control oT Exposes Power Cord Hook
ae el Here are the detailed instructions for installing the window panel info sliding sash or hung windows. For certain windows, such 8 a casement window, you will need to improvise several steps of the installation as each specific window will be different. 1. Cut the Foam seal B (adhesive type) to the proper length and attach i to your horizontal {or vertical} siding window. , Foam seal B Foam sop 8 {adhesive type) {adhesive type} 2. Attach the insect guard to the back side of the window panel.
Double-hung sash window Siding sash window Hole Ingest guard net Fain guard Rain guard br. insert the insect guard firmly io ensure that the four projections fit into the holes of the window panel. Make sure that Side Als on the top.
§.installing the Window Panel(s) This window installation kit comes with 3 pansies o adjust fo your exact window size. You may not need fo use all three panels. To begin, sapless rear fo the guide below: » If your window is less than 28 inches long you only need the window anal. You may need to saw off part of the window pane! if your window is smaller than the window pans! length = If your window Inches long, you will need the window and adjustment panel. You will not ends the nonsexist panel.
a. Find the adjustment pane! {with two grooves on each end), and a Fixed Clip and Mounting Plate. b. instar the fixed clip lino the groove of the adjustment pans! ©. Slide the fixed sip into the grove of the window pane! and slide the fixed clip until there is no gap between the two panels. d. Screw the mounting plate into the fixed clip to secure the pane's together once It Is at the length of your window. e.
8. insert the window pane! into the window sill and close the window securely against the Window pane! 7. Stuff Foam Seal A {non adhesive} between the glass and the window to prevent air and insects from getting info the room. #.
Installing the Exhaust Hosea Please note that the exhaust hose is REQUIRED to use for this portable air conditioner. This TOOT portable air conditioner (ike all sir conditioners) must produce heat 8s a byproduct of producing coo! air. If you don't connect the exhaust hose your unit will exhaust this hot air into the room you are trying fo cool. That won't work very well. 1} Twist the Joint and Rear Clip clockwise unto the exhaust hose.
Tips: In order to improve the cooling efficiency of your air conditioner, the exhaust hose should be as short and direct ss possible. Our suggested configuration is shown barrow. correct under 51 inches. wrong Removing Collected Water TOOT portable air conditioner comes with an auto-evaporation system. The unit automatically evaporates the condensation. There is no need to employ the water except in humid conditions Manual Drainage The internal pan can hold about 0.5L of water.
drainage port 3} Plug back the rubber plug to the port. The unit will resume separation in 3 minuses. Mote: You can aso insert a drain hes (included) to the port to ald drainage. Here, you will need to insert the hose to the port first before operation and secure it with a pipe clip. Then, atlas it to the drainage pipe clip at the back of the machine. When draining, remove the hose from the clip and water will flow farm the pips.
2. Screw the drain hose adapter into the spout by twisting clockwise and attach the drain hos to the drain adapter. Bose: Wuhan using the continuous drainage option make sure that the air conditioner is located on a fiat, elev! surface and that the drain hose is directed downwards and clear of any obstructions. Spicing the air conditioner on sn uneven surface may result in the chassis filing with water until the H8 malfunction code is displayed.
let] ng and Maintenance To avoid electric shock, turn off the air conditioner and disconnect from power before cleaning. Do not wash or douse the air conditioner with water. Never use abrasive or flammable sentiments io clean the air conditioner. Cleaning the outer case Wipe with a soft cloth sacked In warm water and a mild detergent, if needed. Cleaning the exhaust hose Remove the exhaust hose from the air conditioner and clean with a soft cloth soaked in warm water.
TCT TRE Pr-Season Maintenance Checklist » Hack tha power cord for any cuts or exposed wiring » Check the ground prong is still on your power plug e Clan the alr fifer « Check whether the hose saddlers and exhaust hose are installed tightly snd free of damage Post-Season Maintenance Checklist « Disconnect unit from the power outlet « Clean air tier and exterior case » Drain any accumulated water from the air conditioner « Wrap the air conditioner in plastic io prevent the accumulation of dust Len-Term Storag
Troubleshooting troubleshooting Solution Ne air is blowing Check whether the air pullet or inst is blocked Remove the obstacles bio eking the alr outlets from the air and inlets conditioner Hack if the evaporator | After defrosting is finished, is defrosting the AC will resume operation Temp cannot be adj in Is the unit in auto mods? hig ho ot be adjusted i Bet temperature auto mode cannot be adjusted | Your desired temperature i P Tom sai ranges is 61-88°F exceeds the AT range Air blowing from Check if the
LET Te el ele If yous experience any of the below malfunction codes, remove the unit from power Tor a few minutes. Plug the unit back in to determine if the malfunction code is still present.
Warranty & Customer Support Warranty Information 1. 1-Your warranty: TOOT Portable Air Conditioner comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing and material defects. Please visit warranty for more details. 2. Additional 8-Month warranty extension: You can get a 6-month warranty extension by registering your new product at www directions overextend Customer Support Questions? We are hers to help §, +1702-514-1603 @ www tosotdirest.
