Use and Care Manual

drainage port

drainage

pipe clip

screw

3) Plug back the rubber plug to the port. The unit will resume operation in 3 minutes.

Note: You can also insert a drain hose (included) to the port to aid drainage.

Here, you will need to insert the hose to the port first before operation. Then,

attach it to the drainage pipe clip at the back of the machine. When draining,

remove the hose from the clip and water will flow from the pipe.

Continuous Drainage

Water can be drained into a floor drain by attaching a drain hose (included) to the

continuous drain port.

1. Remove the continuous drain cap by turning it counter-clockwise.