Use and Care Manual

28
Installation
Tools Required
Replacing the Batteries
1. Press the back side of the remote control
battery cover and slide out following the
engraved arrow.
2. Replace with two new AAA(1.5V) batteries
of the same make and model.
correctly.
Make sure the polarities (+ & -) are aligned
3. Reinstall the battery cover box.
Phillips head screwdriver
Tape measure Scissors
Saw
Pencil
Home management
You can invite family member to control all the devices in the Family. For more
information, please refer to the instructions in the App.
If you have problems, please refer to "Help" in the App or contact our support team.
signal sender battery
Cover of battery box
remove
reinstall