Use and Care Manual

10
+/- Button
● Pressing the “+” or “-” button will increase/decrease the set temperature by 1°F.
Holding the button for 2 seconds will cause the temperature to change rapidly.
Release the button once your desired temperature is reached.
● After pressing the Timer button, each press of the +/- button will increase/
decrease the time by 0.5 hours. Holding the button for 2 seconds will cause the
timer to change rapidly. Release the button once your desired time setting has
been reached.
Fan Button
Press this button to cycle through the Auto mode and 3 fan speeds (Low, Medium,
High). Under auto fan speed, the air conditioner will automatically adjust the fan
speed according to ambient temperature.
3
Swing Button
Not available for this model.
4
5
Auto
Speed 1 Speed 2 Speed 3
a. Auto mode: The air conditioner will adjust the fan speed automatically to
maintain the set temperature. In this case, set temperature cannot be adjusted.
b. Cool mode: Standard cooling mode. The set temperature and fan speed can
both be adjusted.
c. Dry mode: The unit will run on low speed for dehumidification. The fan speed
cannot be adjusted.
d. Fan Only mode: The air conditioner will not produce cool air, only blow air from
the outside. The fan speed can be adjusted.
e. Heat mode: Not available for this model.
Dry HeatCoolAuto
Fan
Only