User Manual Portable Air Conditioner Before using your TOSOT Portable Air Conditioner please read this user manual in its entirety.
Welcome to the TOSOT Direct Family! We’re extremely happy to welcome you as a new member of our family! Please read the tips below before using your product for the first time. Tips for First-Time Use 1. The portable air conditioner is a heavy object, which needs two or more people to lift and install. Failure to do so could result in injury or other accidents. 2. Allow the unit to sit upright for at least 3-4 hours before powering on.
Table of Contents Safety and Instructions ------------------------------------------- 01 Installation and Setup ------------------------------------------- 01 The Refrigerant --------------------------------------------------- 02 Electrical Safety Warning --------------------------------------- 02 Parts Description --------------------------------------------------- 06 Operation -----------------------------------------------------------Control Panel ----------------------------------------------------Remot
Safety and Instructions Please read all instructions before use and save this user manual for future reference. A digital version can be obtained from Customer Support. Your safety and the safety of others are very important to us. We have provided many important safety messages throughout this manual and on the appliance itself. Always read and follow all posted safety messages.
The Refrigerant This air conditioner utilizes fluoride R-32 refrigerant, which is a next-generation refrigerant that efficiently carries heat and has a lower environmental impact than other refrigerants. The refrigerant is flammable and inodorous. Furthermore, it can lead to explosions under certain conditions. However the flammability of the refrigerant is very low and can only be ignited by fire.
● Do not damage, alter, excessively bend, twist, pull or heat the power cord. ● Do not cover the power cord with a rug or carpeting. ● Do not rest hot or heavy objects on the appliance and power cord. ● Always plug into a fixed 115V AC ground outlet. ● Never plug or unplug the appliance with wet hands. ● Push the power plug all the way into the wall outlet so that it will not loose. ● Always grip the plug firmly and pull straight out from the outlet when taking it out.
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: receiver is connected. LCDI Power Plug (Leakage Current Detection and Interruption) The power cord used with this air conditioner contains a current detection device designed to reduce the risk of fire.
Recommended Operating Environment ● The recommended operating temperature range is 61°F -95°F (16°C-35°C). ● The appliance is for indoor use only. ● The appliance must be positioned so that the plug is easily accessible. ● This air conditioner is intended for residential use, not for commercial or industrial purposes. ● Open space around the air conditioner should be at least 12 inches (30cm) to ensure airflow. ● Please keep the air inlet and air outlet clean and free from obstacles.
Parts Description 1 Control Panel 2 Vertical Airflow Louver 2 3 Horizontal Airflow Louver 3 4 Caster Wheels 5 Air Intake 6 Joint 7 Exhaust Hose 8 Rear Clip 9 Power Cord 11 4 10 Power Cord Hooks 5 8 7 6 FAN On/Off 9 OPER Mode Fan Swing Sleep Timer Health WiFi Remote Control 10 This picture is only for reference. Please refer to the actual product for the appearance.
Operation Control Panel 1 WiFi 2 3 4 5 6 1 +/- Button 4 ON/OFF Button 2 Fan Button 5 Timer Button 3 WiFi Button 6 Mode Button Notes: ● After powering the air conditioner on, the air conditioner will emit a single beeping sound after powering on. After that, you can operate the air conditioner by using the control panel or remote. ● The air conditioner will emit a beep after pressing each button on the control panel.
1 +/- Button ● Pressing this button will allow you to change the temperature setting. ● After pressing the timer button, the +/- buttons will adjust the timer setting from 0.5-24 hours in 0.5-hour increments. After the 10-hour mark, the +/- button will adjust the timer setting in 1-hour increments. It will take 5 seconds for the timer settings to be confirmed by the machine. Note: This button is not valid under dry and fan model.
Remote Control This is a universal remote control for a variety of models. If your model does not have a function listed on the remote control, there will be no changes in the operation of your unit. The max range of the remote control is 25 feet with no obstacles or interference from other devices, such as wireless phones or fluorescent lamps. The air conditioner will emit a beep sound if the signal from the remote has been received successfully.
Auto Cool Dry Fan Only Heat a. Auto mode: The air conditioner will adjust the fan speed automatically to maintain the set temperature. In this case, set temperature cannot be adjusted. b. Cool mode: Standard cooling mode. The set temperature and fan speed can both be adjusted. c. Dry mode: The unit will run on low speed for dehumidification. The fan speed cannot be adjusted. d. Fan Only mode: The air conditioner will not produce cool air, only blow air from the outside. The fan speed can be adjusted.
6 Sleep Button Press this button to enter the sleep operation mode. While in sleep mode, you can only use the Cool modes. When in sleep mode, the AC temperature will automatically increase by 2°F for first hour and 4°F for second hour and then will keep running with this temperature. 7 Timer Button Press this button to activate the timer button. Use the +/- buttons to adjust the length of the timer before the unit powers off. The time setting range is 0.5-24 hours, in 0.5-hour increments.
App Control Install App 1. Scan the QR code or search for "GREE+" in the App Store or Google Play Store to download and install. 2. Open the "GREE+" App after installation. You can create a new account or log in with an existing account. Note: Please allow the app to use your location, network and Bluetooth. Add device After successful login, you are at the “My Home” screen. Make sure that your smartphone’s Wi-Fi and Bluetooth are turned on. Add a device by tapping the “+” button as shown in the picture.
a. The available device icon will be displayed once discovered. (1) Tap the icon to enter the next step. Select your preferred Wi-Fi network (5GHz WiFi is not yet supported) , enter your WiFi password, then tap the “Next” button.
(2) The App will start to search for new devices. Wait for 2 minutes or until the device is connected. The Device name can be customized. Tap “Done”. Once the device is added successfully, you will return back to the “My home” page.
b. If no device is found, please manually add your device. (1) Tap the device category icon and follow the instruction to reset your WiFi. For this model, Tap “Portable air conditioner” and then choose “Remote control (with WiFi button)”.
(2) Tap “Add manually” and follow the instructions. Hold the remote control and direct it to the device. With the remote control powered off, press the “Mode” and “WiFi” buttons simultaneously for 3 seconds. Once you hear a beep sound, wait for 5 seconds and then remove the power plug. After 3 seconds, insert the power plug. Tap “Next” to enter the next step.
(3) Select your preferred Wi-Fi network (5GHz WiFi is not yet supported), enter the password, then tap the “Search device” button. Tap “Next” to connect your mobile phone WiFi to the hotspot “GR-AC-XXXX”, the password is 12345678. When the connection is successful, return to the App.
(4) The App will start to search for devices. Wait for 2 minutes or until the device is connected. The device name can be customized. Tap “Done”. Once the device is added successfully, you will return to the “My home” page.
My Home Scene ● This function allows you to activate all settings with one click. Home and Away are the two default scenes. ● Tap the scene button to edit your desired setting for the first use. Tap “Setting” to make your customizations then tap the “Save” button. The scene setting will be saved.
● If you want to execute the preset modes , tap the scene button. The APP will pop up a window to tell you the setting is done.
My appliances ● This screen shows the real time status of all your devices. Tap the appliance icon to start control. Tap the power button to turn on the air conditioner.
● Long press the appliance icon to delete the appliance. Choose the unwanted device and tap “Delete” then confirm.
Change the device name Press the pencil icon to edit the device name, then tap the “Save” button when complete. Mode setting Slide the icon to choose mode: cool, dry, fan, heat, auto. * Heat mode is not available for this model. Temperature setting Slide the temperature display to adjust the set temperature. Fan setting Slide the fan icon to set fan speed: auto, low, medium, high.
Other functions ● X-Fan: Not available for this unit. ● Health: Not available for this unit. ● Light: Turn the light on the conditioner on or off. ● Sleep: Only available on Cool mode. ● Timer: Add a schedule by tapping the “+” button. Set the on/off time of your choice and tap the “Save” button. The new schedule will be saved. Toggle the slider to cancel the schedule. Repeat this step to set different timers.
NOTE: The button will turn blue and the icon will be shown at the top when the function is applied. Tap the button again to cancel the setting. Device Management Tap the user icon to enter device management. Scene——Edit scene ● Tap the scene name to manage the setting. The current setting will be shown. Press “Execute” to activate the scene immediately. ● Press “Edit” to adjust settings. Choose the device and tap “Settings”, after adjustments tap the “Save” button again. The scene setting will be saved.
26
Scene——Add scene Tap “+” to add a new scene. Customize the name and settings then save. Scene——Delete scene Tap “Delete” to delete a scene. You can tap the scene name to see detailed settings. Choose the unwanted scene and tap “Delete” then confirm. Two default scenes can not be deleted.
Home management You can invite family member to control all the devices in the Family. For more information, please refer to the instructions in the App. If you have problems, please refer to "Help" in the App or contact our support team. Replacing the Batteries 1. Press the back side of the remote control battery cover and slide out following the engraved arrow. 2. Replace with two new AAA(1.5V) batteries of the same make and model. Make sure the polarities (+ & -) are aligned correctly.
Parts List Accessory kit for window installation Window panel Adjustment panel Joint Exhaust Hose Insect Guard Fixed Clip x 2pcs Screw x 4pcs Bracket Rear Clip Mounting Plate x 2pcs Foam Seal A (non adhesive) Exhaust cover Foam Seal B (adhesive type) Accessory kit for installing the drain hose Drain Hose Adapter Drain Pipe Clip Drain Hose Others FAN On/Off OPER Mode Fan Swing Sleep Timer Health WiFi Remote Control Power Cord Hook x2pcs 29 Extension panel Rain Guard x 2pcs
Installing Your AC Here are the detailed instructions for installing the window panel into sliding sash or hung windows. For certain windows, such as a casement window, you will need to improvise several steps of the installation as each specific window will be different. 1. Cut the Foam seal B (adhesive type) to the proper length and attach it to your horizontal (or vertical) sliding window. Foam seal B (adhesive type) Foam seal B (adhesive type) 2.
Double-hung sash window Insect guard net Hole Sliding sash window "A" Rain guard Insect guard net Projection Hole "A" Projection Rain guard b. Insert the insect guard firmly to ensure that the four projections fit into the holes of the window panel. Make sure that Side A is on the top. Double-hung sash window Sliding sash window Projection "A" Window panel Window panel "A" Projection 4. Slide the Exhaust Cover into the grooves of the Window Panel.
5.Installing the Window Panel(s) This window installation kit comes with 3 panels to adjust to your exact window size. You may not need to use all three panels. To begin, please refer to the guide below: ● If your window is less than 28 inches long you only need the window panel. You may need to saw off part of the window panel if your window is smaller than the window panel length. ● If your window is 28 to 46 inches long, you will need the window and adjustment panel.
a. Find the adjustment panel (with two grooves on each end), and a Fixed Clip and Mounting Plate. b. Insert the fixed clip into the groove of the adjustment panel. c. Slide the fixed clip into the groove of the window panel and slide the fixed clip until there is no gap between the two panels. d. Screw the mounting plate into the fixed clip to secure the panels together once it is at the length of your window. fixed clip mounting plate e.
6. Insert the window panel into the window sill and close the window securely against the Window panel. 7. Stuff Foam Seal A (non adhesive) between the glass and the window to prevent air and insects from getting into the room. Foam Seal A 8. Optional: Attach a bracket to the window frame with a screw to prevent any gaps from opening up.
Installing the Exhaust Hose Please note that the exhaust hose is REQUIRED to use for this portable air conditioner. This TOSOT portable air conditioner (like all air conditioners) must produce heat as a byproduct of producing cool air. If you don’t connect the exhaust hose your unit will exhaust this hot air into the room you are trying to cool. That won’t work very well. 1) Twist the Joint and Rear Clip clockwise onto the exhaust hose.
Tips: In order to improve the cooling efficiency of your air conditioner, the exhaust hose should be as short and direct as possible. Our suggested configuration is shown below. correct under 51 inches about 24 inches wrong Removing Collected Water TOSOT portable air conditioner comes with an auto-evaporation system. The unit automatically evaporates the condensation. There is no need to empty the water except in humid conditions. Manual Drainage The internal pan can hold about 0.5L of water.
drainage port 3) Plug back the rubber plug to the port. The unit will resume operation in 3 minutes. Note: You can also insert a drain hose (included) to the port to aid drainage. Here, you will need to insert the hose to the port first before operation. Then, attach it to the drainage pipe clip at the back of the machine. When draining, remove the hose from the clip and water will flow from the pipe.
2. Screw the drain hose adapter into the spout by twisting clockwise and attach the drain hose to the drain adapter. Note: When using the continuous drainage option make sure that the air conditioner is located on a flat, level surface and that the drain hose is directed downwards and clear of any obstructions. Placing the air conditioner on an uneven surface may result in the chassis filling with water until the H8 malfunction code is displayed.
Cleaning and Maintenance To avoid electric shock, turn off the air conditioner and disconnect from power before cleaning. Do not wash or douse the air conditioner with water. Never use abrasive or flammable solvents to clean the air conditioner. Cleaning the outer case Wipe with a soft cloth soaked in warm water and a mild detergent, if needed. Cleaning the exhaust hose Remove the exhaust hose from the air conditioner and clean with a soft cloth soaked in warm water.
2. Clean the filter After removing, use the dust attachment of your vacuum to suck up any dirt or warm water mixed with a mild detergent. A soft bristle brush may help remove some of the dirt, if needed. 3. Reinstall the filter After the filter has dried completely, reinstall back into the air conditioner. Notes: ● Clean the filter at least every three months. ● Do not touch the metal fins in the air conditioner after removing the filter as they may cause personal injury.
Troubleshooting Issue Troubleshooting Solution Check whether the air outlet or inlet is blocked Remove the obstacles blocking the air outlets and inlets Check if the evaporator is defrosting After defrosting is finished, the AC will resume operation Is the unit in auto mode? Temp cannot be adjusted in auto mode Your desired temperature exceeds the AC range Temp set range is 61-86°F Check if the source of the odor is somewhere in the room Remove the source of the odor and clean the filter Abnorm
Malfunction Codes If you experience any of the below malfunction codes, remove the unit from power for a few minutes. Plug the unit back in to determine if the malfunction code is still present.
If you notice or experience any of the following conditions, please turn off the air conditioner, disconnect from power, discontinue use, and contact support immediately. ● The power cord is overheating or otherwise damaged ● Abnormal sound during operation ● A strange odor is emitted from the unit ● Excessive water leakage the unit Do not attempt to repair or retrofit the air conditioner by yourself. All repairs must be performed by qualified individuals.
Warranty & Customer Support Warranty Information 1. 1-Year warranty: TOSOT Portable Air Conditioner comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing and material defects. Please visit https://tosotdirect.com/warranty for more details. 2. Additional 6-Month warranty extension: You can get a 6-month warranty extension by registering your new product at www.tosotdirect.com/extend. Customer Support Questions? We are here to help support@tosotdirect.com www.tosotdirect.
