Use and Care Manual

-26-
Filter 2 — hold the buckle of filter 2 to pull it outwards.
Install wire hook — press the clasp at the upper side of back plate, assemble the first wire hook
downwards into the groove of upper clasp; press the clasp at the lower side of back plate, assemble
the second wire hook upwards into the groove of lower clasp.
remote controller box
groove
wire hook
clasp
Install remote controller box—the opening of remote controller box is upward, aim the groove of the
back side at the groove of the left side plate, and then assemble the remote controller box.
buckle of filter 2
filter 2
Installation instructions