Use and Care Manual

Install rear clip — aim the rear clip(upper) at the rear clip(lower),
fix them together, press the clasp forcibly in to the groove.
Install the hose at the rear clip — aim the opening of hose at the
round mouth of rear clip, rotate the hose anticlockwise into the
rear clip.
Install the hose at the joint 1 — aim the opening of hose at the
round mouth of joint 1, rotate the hose anticlockwise into the
joint 1.
Connect rear plate 1 and rear plate 2 — fix the adjustable plate
at the sliding groove of rear plate 1, put the adjustable plate into
the rear plate to enable the adjustable plate slide inside the rear
plate, then connect the rear plate 2 and fix the rear plate 1 and 2
with screw. Adjust the distance between rear plate 1 and rear
plate 2 according to the required installation height.
clasp
screw
sliding groove of rear plate
adjustable plate
hose
joint 1
hose
rear clip
-23-
Installation instructions