Change for life AIR CONDITIONER Owner's Manual Original Instructions Portable room air conditioner Model: GPC07AJ-A3NNA1A GPH07AJ-A3NNA1A Thank you for choosing our product. Please read this Owner’s Manual carefully before operation and retain it for future reference. If you have lost the Owner's Manual, please contact the local agent or visit www.gree.com or send an email to global@gree.com.cn for the electronic version.
Content OPERATION ENVIRONMENT............................................................1 SAFETY WARNING ............................................................................2 SUMMARY ..........................................................................................3 WORKING PRINCIPLE.......................................................................3 STRUCTURE ..........................................................................................4 OPERATING METHODS...................
Explanation of Symbols DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury. NOTICE Indicates important but not hazard-related information, used to indicate risk of property damage.
Operation Environment ● The working range of COOL mode and DRY mode: 16℃(61°F)-35℃ (95°F). ● The working range of HEAT mode: 10℃(50°F)-27℃(80.6°F). ● The Max Cooling operation temperature for the air conditioner is: DB/WB 35℃(95°F)/24℃ (75.2°F). ● The Max Heating operation temperature for the air conditioner is: DB/WB 27℃(80.6°F)/ --. ● The appliance is for indoor use only. ● The appliance must be positioned so that the plug is accessible.
Safety Warning ● This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.
● The fuse style:T3.15AH250V;Allowed maximal current pass throught the fuse can not above 3.15A. Summary This PORTABLE AIR CONDITIONER is a small, movable air conditioner. It possessed the functions of COOL, HEAT,DRY and the Separate Ventilation, and depends on different places, it can be moved as will.It is fit for home and office use, especially fit for the house with many rooms. With the compact configuration, excellent workmanship, elegant appearance, it looks like a standing Benz car.
Structure Front Display Board Air outlet Remote control receptor Rear Handle Upper air inlet grille Heat air exhaust vent Lower air inlet grille Power cord -4-
Operating methods ※. USAGE NOTICE Electrical Requirements WARNING Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not use an extension cord. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in death, fire, or electrical shock. Power must adopt the rated voltage and special circuit for AC. And diameter of power cord should be big enough. Time-delay fuse or time-delay circuit breaker is recommended to be used.
Operating methods Names and Functions Remote Controller 4 2 3 1 5 6 Control panel and the function 1.Power: Press once to start and press once more to stop the unit. 2.Mode: Press this button to change the operation mode in order of: GPC07AJ-A3NNA1A: GPH07AJ-A3NNA1A: COOL → DRY → FAN →HEAT COOL → DRY → FAN 3." " " ": In "COOL" or "HEAT" mode, press" " once, the temperature will decrease 1 °F). Press" " once, the temperature will increase 1 (°F).
Operating methods COOL mode 1). To select a place near the door and window, install the exhaust duct. HEAT mode (not for only cooling unit ) 2). Press "MODE" key to select "COOL" mode. 3). Press" "or " " key to set the suitable temp.16 ( 61°F ) 30 (86°F). 1). Press “MODE” key to select “HEAT” mode. 2). Press" "or " " key to set the suitable temp.16 ( 61°F ) 30 (86°F).
Names and functions of the remote controller 1 ON/OFF Press it to start or stop operation. 2 FAN AUTO Press it to select operation mode OPER AIR HEALTH X-FAN HUMIDITY (AUTO/COOL/DRY/FAN/HEAT). FILTER TURBO MODE HOUR ON/OFF 3 - 4 + : Press it to increase temperature : Press it to decrease temperature setting. setting. 1 ON/OFF MODE 3 5 7 9 2 Press it to set fan speed. Press it to set up & down swing angle.
Names and functions of the remote controller 24 FAN AUTO OPER AIR HEALTH X-FAN HUMIDITY 15 16 17 18 15 FILTER HOUR 21 19 MODE icon: 20 20 the up & down swing button. Press this button again to clear the display. 21 LOCK icon: LIGHT icon: 22 SET TIME display: After pressing TIMER button, ON or OFF will blink.This area will show the set time. SLEEP icon : 23 DIGITAL display: This area will show the set temperature. In SAVE mode,"SE" will be is displayed by pressing the SLEEP button.
Operation of the remote controller Remote controller description This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status. 1 ON/OFF : Press this button to turn on the unit. Press this button again to turn off the unit.
Operation of the remote controller 7 HEALTH SAVE: Press HEALTH part of this button to turn on or off HEALTH function. Pressing SAVE part of this button, is displayed and the unit goes into SAVE operation mode. Press SAVE part of the button again to cancel SAVE function. During SAVE operation, the temperature and fan speed is not adjustable. 8 : ● Press button to start or stop left & right swing function.The remote controller defaults to simple swing condition.
Operation of the remote controller 13 SLEEP : Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available in COOL, HEAT (Only for models with heating function) or DRY mode to maintain the most comfortable temperature for you. 14 LIGHT: Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If the light is turned on , is displayed. If the light is tunrned off, disappears.
Malfunction analysis Please check below items before asking for maintenance. If the malfunction still can’t be eliminated, please contact local dealer or qualified professionals. Phenomenon Air conditioner can't operate Troubleshooting Solution ● Power failure? ● Wait after power recovery. ● Is plug loose? ● Reinsert the plug. ● Whether the air switch is tripped off or fuse is burnt? ● Ask professional person to replace air switch or fuse.
Malfunction analysis Phenomenon Troubleshooting Solution ● Whether air outlet or air inlet is ● Eliminate the obstacles. blocked? ● Under heating mode, whether indoor temperature is reached to set temperature? ● Indoor unit will stop blowing fan after reachingto set temperature. No fan blowed ● Whether heating mode is staout from air rted up just now? conditioner ● In order to prevent cold air, air conditioner will delay for a while to be started up, which is the normal phenomenon.
Malfunction analysis Malfunction code H8 Chassis is full of water. 1. Pour out the water inside chassis. 2. If "H8" still exits, please contact professional person to maintain the unit. F1 Malfunction of ambient temperature sensor. Please contact previsional person to deal with it. F2 Malfunction of evaporator temperature sensor. Please contact previsional person to deal with it. F0 1.Refrigerant is leaking 2.System is blocked 1.
Accessories and installation of heat exhaust hose Note of Installingheat discharge pipe The discharge pipe is suggested to be installed according to below figure by the manufacturer. correct under 51 inchs about 24 inchs User can adjust the installation method of the discharge pipe basing on the requirement, while the similar installation methods as below which will lead to unsmoothly air-out are not allowed.
Accessories and installation of heat exhaust hose ● The length of the heat discharge pipe is less than 40 inchs. It is recommended to use it with shortest length. ● When installing,heat discharge pipe should be as flat as possible. Don’t prolong the pipe or connect it with other heat discharge pipe.
Installation instructions Installation in a double-hung sash window the guard combined above to the 1 Attach window panel Projection Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel. the foam seal A (adhesive type) to 2 Cut the proper length and attach it to the window stool. Foam seal A (adhesive type) the window panel to the window 3 Attach stool. If the inner width of the window is between 22" (559mm) and 24" (609mm) inclusive.
Installation instructions Adjustment panel If the inner width of the window is between 24" (609mm) and 36.8" (934mm) inclusive. (1) Open the window sash and place the window panel on the window stool. (2) Slide the adjustment panel to fi t the window frame width. (3) Secure the window panel to the stool with 3 screws. If the inner width of the window is between 36.8" (934mm) and 48" (1219mm) inclusive. 24"~36.8" Extension panel (1) Attach the extension panel to the adjustment panel.
Installation instructions Installation in a sliding sash window the guard combined above to the 1 Attach window panel. Push the insect guard net firmly to ensure that its four projections fit into the holes in the window panel. Projection the foam seal A (adhesive type) to 2 Cut the proper length and attach it to the window frame. Foam seal A (adhesive type) the window panel into the window 3 Install frame. If the inner height of the window is between 22" (559mm) and 24" (609mm) inclusive.
Installation instructions If the inner height of the window is between 24" (609mm) and 36.8" (934mm) inclusive. Adjustment panel (1) Open the window sash and place the window panel on the window frame. (2) Slide the adjustment panel to fit the window frame height. 24"~36.8" (3) Secure the window panel to the window frame with 3 screws. If the inner height of the window is between 36.8" (934mm) and 48" (1219mm) inclusive. Extension panel (1) Attach the extension panel to the adjustment panel.
Installation instructions the foam seals (adhesive type) A and 4 Cut B to the proper length and attach them to the window panel. Attach foam seal A to the window panel and extension panel, and attach foam seal B to the adjustment panel. the window sash securely against 5 Close the Window panel. Foam seal A (adhesive type) the foam seal to an appropriate 6 Cut length and seal the opening between the side of the inner window sash and the outer window sash. 7 Attach a bracket with the screw.
Installation instructions clasp Install rear clip — aim the rear clip(upper) at the rear clip(lower), fix them together, press the clasp forcibly in to the groove. hose rear clip Install the hose at the rear clip — aim the opening of hose at the round mouth of rear clip, rotate the hose anticlockwise into the rear clip. joint 1 Install the hose at the joint 1 — aim the opening of hose at the round mouth of joint 1, rotate the hose anticlockwise into the joint 1.
Installation instructions screw The length of rear plate 1 and rear plate 2 can be adjusted according to user’s requirement. Loosen the screws fixing the rear plate 1, rear plate 2 and adjustable plate to move the rear plate 2 and adjustable plate (can slide freely in the sliding groove of rear plate 1 and rear plate 2) to the required length, and then fix the rear plate 1 and rear plate 2 with screws.
Installation instructions Install the exhaust hose sub-assy at the rear plate — fix joint 1 of exhaust hose sub-assy at the air outlet of back plate and the groove at the two side of back plate air outlet, then insert joint 1 into the groove downwards. air outlet groove of back plate joint 1 Install baffle (air outlet) — when the unit is not to be used, press the clasp of protective grille to make it separate from the rear plate 1 and then pull the protective grille outwards to remove it.
Installation instructions Filter 2 — hold the buckle of filter 2 to pull it outwards. filter 2 buckle of filter 2 Install wire hook — press the clasp at the upper side of back plate, assemble the first wire hook downwards into the groove of upper clasp; press the clasp at the lower side of back plate, assemble the second wire hook upwards into the groove of lower clasp.
Installation of drainage hose ■ Instructions for drainage pipe installation. 1. Fix the drainage pipe clip on the right of rear side plate near drainage port with a screw. drainage pipe clip screw 2. Remove the rubber plug at drainage port. drainage port 3. Put the drainage pipe into drainage port and screw it up, and then bind it with pipe hoop. pipe hoop rubber plug drainage pipe clip drainage pipe drainage port pipe hoop ■ Drainage way as follows. 1.
Care and maintenance Move unit There are wheels at the bottom of the unit, according to the demand, it can be moved in the room very conveniently. Air inlet grille WARNING Before maintenance, please pull out the power plug and cut off power supply to avoid electric shock. Clean the air filter Performance of the unit will decrease if there are too much dust gathered, thus clean it at least once two weeks.
Care and maintenance Clean the air conditioner Please use a cloth that slightly moistened with water whose temperature is below 40°C (104°F) (or the soap water or the water with cleanser) after wiping the dirt. Do not use gasoline, diesel oil or the congeneric substance to clean the unit. Before cleaning, please pull out the power plug. S GA Electric Schematic Diagram The Electric schematic diagram are subject to change without notice. Please refer to which one on the unit, GPC07AJ-A3NNA1A: ROOM TEMP.
Troubleshooting If malfunction occur, please check the following before maintenance: Troubles Possible Causes Solutions The air conditioner doesn't start. The power supply is not connected well. The power plug is not inserted tightly. There is the malfunction of power plug or socket. The fuse is broken. Although it was set to COOL mode, there is no cool wind. 1. The room temp. is lower than the set temp. 2. The evaporator frosts. 1.This is the normal phenomenon. 2.
User notices Location Do not install the unit in the hermetic place, and keep well ventilation, to avoid malfunction occurs. Do not install the unit at where it will be exposed to direct sunlight, in order to avoid fading and efficiency reducing. Do not install the unit in the moist place, it can cause electrical leakage. Please do not install the unit to the following places: The places with gas, fire, oil or where it will cause malfunction. Others Please pay attention to the people of following: 1).
● Meaning of crossed-out wheeled dustbin: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. ● Contact you local government for information regarding the collection systems available. ● If electrical appliances are disposed of in landfills of dumps, hazardous substances can leak into the groundwater and get into the food chain,damaging your health and well-being.
GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai,Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: gree@gree.com.cn www.gree.
