Use and Care Manual

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other).

To reduce the risk of electric shock, this plyg is intended to fit in a polarized

outlet only one way. If the plug dose not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper outlet

Always use AC 120V~,60Hz power supply.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFE AT THIS SAFETY

FEATURE IN ANY WAY.

Specifications

Power Supply

Rated Power

Tank Capacity

Max Noise Level

AC120V, 60Hz

50W

1.06Gal / 4L

63dB(A)

User Servicing Instructions

a) Grasp plug and remove it from the receptacle or other outlet device. Do not

unplug by pulling on the cord.

b) Open the fuse cover. Slide open fuse access cover on top of attachment

plug towards blades.

c) Remove the fuse carefully. Push the fuse from the other side to remove the

fuse.

d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

e) Close fuse cover. Slide closed the fuse access cover on top of attachment

plug.

Risk of fire. Do not replace the attachment plug. Contains a safety device

(fuse, AFCI, LCDI) that should not be removed. Discard the product if the

attachment plug is damaged.