User Manual Evaporative Air Cooler Before using your TOSOT Evaporative Air Cooler, please read this user manual in its entirety.
Welcome to the TOSOT Direct Family! We're extremely happy to welcome you as a new member of our family! Please read the tips below before using your product. Tips Keep the original packaging material including packing foam, carton and printed material until you decide to keep the unit. If you need to return the unit, having all of the original packaging material will make it much easier. 1.
Table of Contents Important Safety Instructions -------------------------------------- 01 Installation and Setup -------------------------------------------- 01 Electrical Safety Warning --------------------------------------- 02 Specifications -------------------------------------------------------- 03 Parts List --------------------------------------------------------------- 04 ------------------------------------------------------------ 05 Features ----------------------------------------------
Safety and Instructions Your safety and the safety of others are very important to us. Please read the following safety precautions before use and installation. A digital version can be obtained from customer support.
Electrical Safety Warning Always plug into a fixed 120V 60 Hz AC outlet. To prevent overload, do not use a multi-plug power strip. The capacity of the power socket should be the same as that of the plug of electric appliances. The plug must be inserted into the socket tightly. WARNING: To reduce the risk of fire or electric shock, do not use this air cooler with any solid-state speed control device. Do not use the air cooler if the cord or plug is damaged.
User Servicing Instructions a) Grasp plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord. b) Open the fuse cover. Slide open fuse access cover on top of attachment plug towards blades. c) Remove the fuse carefully. Push the fuse from the other side to remove the fuse. d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug. Risk of fire.
Parts List 1 2 3 5 4 6 Remote Control 7 1 Control Panel 2 Front Case 3 Cooling Pad and Grill 4 Air Outlet 5 Water Tank 6 Aromatherapy Box 7 Base 04
Installation Please assemble the base according to the following installation method. Do not use it if not assembled properly. 1. Take the two parts of the base and the unit body out of the box. Rotate the two part of the base along the semicircular positioning slot until they are at the same level as the bottom surface and the clasps at the two sides are locked. Lock the Clasp Hole Semicircular Positioning Slot Clasp Hole Clasp Clasp Clasp Hole Lock the Clasp Hole Semicircular Positioning Slot 2.
Long Clasp Long Base Slot Power Cord Long Clasp Long Base Slot Cable Clasp of Base Note: 1. When you hear a “click” sound while rotating the base, it indicates that the base is assembled. Do not rotate it forcibly to avoid damaging the oscillation function. 2. When the unit is operating, do not turn the unit body or base forcibly.
Features Using the Ice Pack You can also choose to use it or not based on the temperature.The ice pack can be frozen repeatedly and reused. Note: 1. Before placing or taking out the ice pack, make sure to turn off the unit and remove the power cord from the power outlet. 2. Do not open the cover of the ice pack or eat the ice crystal inside the ice pack. Before using, please place the ice pack in the freezer for about 4 hours, then place it in the water of the internal water tank.
Using the Aromatherapy Box Pull out the aromatherapy box from the fan and take out one piece of the cotton inside. Drop 1-2 drops of essential oil onto the cotton and put the aromatherapy box back into the fan. Note: Do not let the aromatherapy oil contact other parts except the aromatherapy box (such as the air louver, body, etc.) to prevent damage. If it has contacted other parts, please clean and wipe them with a dry cloth.
Operation Adding water Before pulling out the water tank, please be sure to turn off the power. Add water but do not exceed the highest water level. Don't exert too much force when removing or inserting the water tank to avoid damaging the components. When removinig, please make sure the residual water inside the honeycomb cooling pad has dripped back to the water tank to prevent it from spilling outside the unit.
Control Panel 1 4 5 2 6 7 3 1 1 Water Alert Indicator 5 Mode Button 2 Humidification Button 6 Power Button 3 Oscillation Button 7 Fan Speed Button 4 Timer Button Water Alert Indicator Flashes to indicate there is not enough water in the water tank. Please add water according to the “Adding water” section and press the humidification button to restart the function.
2 Humidification Button Press this button to turn on/off the humidification function and the humidification indicator will be on. Before starting the humidification function, please check the water level inside the water tank. If the water level is close to or below the lowest water level mark, please add water. 3 Oscillation Button Press this button to turn on/off the oscillation function. When the oscillation function is set, the oscillation indicator will light up.
Remote Control + 1 - 2 3 TIMERP RESET OSC. MODE HUM. 4 1 +/- Button 5 2 Oscillation Button 6 3 Mode Button 4 Timer Button 5 Power Button 6 Humidification Button 1 +/- Button Press this button to increase/decrease the fan speed. 2 Oscillation Button Press this button to turn on/off the oscillation function. 3 Mode Button Press this button to choose among 3 modes: general wind, natural wind, and sleeping wind. 4 Timer Button Press the button to set the timer from 1 to 7 hours.
Maintenance Please be sure to cut off the power before maintenance. Use a wet cloth to wipe the surface of the unit. Do not wash the unit with water. Do not use a corrosive detergent to clean the unit. Place your thumb in the pressing groove of the water tank, and squeeze the clasp of the water tank upward with the remaining four fingers to pull out the water tank completely. Do not pull the water tank with excessive force. The water pump is fixed at the bottom of the water tank.
Troubleshooting Issues The unit can't operate No humidification / pump has abnormal sound Self check Possible solutions Power cord is not connected or connected poorly Make sure it is well connected Internal wiring is loose Contact our support team No water in the water tank, or water quantity is below than the lowest water level of the water tank Disconnect the power and add water, make sure the water level is between the highest and lowest water level The pump can't draw water Press the Humidi
Warranty & Customer Support Warranty Information 1. 1-Year warranty: TOSOT Evaporative Air Cooler comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing and material defects. Please visit https://tosotdirect.com/warranty for more details. 2. Additional 6-Month warranty extension: You can get a 6-month warranty extension by registering your new product at www.tosotdirect.com/extend. Customer Support Questions? We are here to help support@tosotdirect.com www.tosotdirect.
