User's Manual

At FM mode: 1. Radio frequency is increasing by every single press
2. long pressing 3 seconds, radio frequency will be stopped and play when receving a
strong radio signal
At BT mode, 1. Press once is next track
5. listening Radio (FM):
1. Adjusting built-in FM antenna wire at the back of unit
2. Press once ‘FM’ button to turn on the Radio …. Press it twice, is close the Radio frequency
3. Press Tuning +/- 3 seconds, radio frequency to be stopped when receiving a strong radio signal
6. Auto scanning:
Press the FM button once to turn on the Radio station, Hold and press the FM button in 3 seconds, go to auto
scanning. (It can be saved up to 29 stations, when memory is fully occupied 29 stations, display will be
appeared ‘FUL’ and flashing is 3 seconds will be off. It will be playback from the first one station (P01)
7. Listen to a pre-stored FM radio station：
At Radio mode press ‘Time set’ button once, and press Tunning +/- to select your stored station to listen
8. Snooze:
When alarm ringing, press ‘Snooze’ button, it will be ringing again after 9 mins. AL1/AL2 indicator will be
flashing constantly
When Alarm ringing, alarm will be stopped when pressing any of keys / buttons (except SNOOZE)
9. Dimming adjustment：
Long press the SNOOZE’ in 2 seconds, to be adjusted the brightness of display
10. Aux-in mode：
1． Plug in the Audio cable with 3.5mm jack to the Aux in jack at the back of the unit to listen your favorite
music from your device / iPad directly
2. Press Aux in button to turn on the AUX in mode, press once again to close the Aux in mode
11. Bluetooth Connection (pairing name: WS-QI209BT)：
1. Press ‘BT’ button to BT mode, display appears ‘BT’, long press the BT button in 3 seconds to close the
BT mode
2. At Bluetooth mode, press once ‘BT’ button to pause the music, press it again to playback
3. When not connection with Bluetooth, it will be turned off after 3 mins.
When connected with Bluetooth, if Bluetooth disconnected, it will be turned off after 3 mins.