Manual

LB ore Calling Service Personnel
"qllilii_ck the following symptoms before requesting servicing.
No power•
• The power cord is not plugged in.
- Plug the power cord into the outlet firmly.
Although the power is on, the VCR will
not work.
• There is no cassette.
- Load a cassette. (page 18)
The clock does not work.
• There has been a power failure.
- Reset the clock. (page 15)
The timer does not work properly•
• The time is incorrect,
- Set the clock correctly. (page 15)
The picture does not appear on the TV
screen.
• The video channel or video input mode is not
set correctly.
- Set the TV channel to the video channel (3 or
4) or set the video input mode on the TV.
(page 11)
• The TV signal is weak.
- Adjust the antenna direction or use an
optional antenna booster.
• The power cord is not plugged in.
- Plug the power cord Into the outlet firmly.
The picture does not appear on the TV
screen during recordin_l and playback.
• The video channel or VCR mode is not set
correctly.
- Press TV/VCR to select the VCR mode and
set the TV channel to 3 or 4. (pages 11,24)
The VCR does not record.
• The loaded cassette has no safety tab.
- Use a cassette with a safety tab or cover the
hole with adhesive tape. (page 18)
The playback picture is poor.
• Tracking is not set appropriately.
- Adjust the tracking manually. (page 19)
• The video heads are dirty
- Clean the video heads with a commercially
available cleaning tape,
The desired sound is not heard, such as
SAP, stereo, or regular sound.
• Setting of sounds is not correct.
- Select a desired sound using A.SELECT.
(page 28)
Noise is present in the Hi-Fi sound being
played.
• Tracking is not set appropriately
- Adjust the tracking manually. (page 19)
The timer recording function does not
work•
• There is an error in programming.
- Reset the timer recording program. (page 27)
• There is no cassette in the VCR.
- Load a cassette with the safety tab attached.
(page 18)
• The cassette does not have the safety tab.
- Use another cassette with a safety tab or
cover the hole with adhesive tape. (page 18)
• The timer indicator is not displayed.
- Press both TIMER simultaneously. (page 26)
• There has been a power failure.
- Reset the clock. (page 15)