Manual

P ] back
section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
CH/TRK
2
FF
REW
-3
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
Press PLAYto start playback.
vc. I /_
To stop playback, press STOP.
"G
r"
o
I ress PLAYduring playback.
A tape runs at double speed
playback.
To resume normal playback Press PLA Y.
Rewinding / Fast-forwarding
Press REWor FFin the stop mode.
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of CH/TRKto adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
19