Operation Manual

13
CH 2
MUTE
TV OPERATION
1
Press ON/STANDBY. Then press TV/VCR to select TV/VCR
mode.
Press Direct Channel Selection.
2
The VOLUME can be adjusted to
a desired level by pressing
VOLUME or . The VOLUME
control is represented by a green
bar on the screen.
3
NOTE:
If the station being viewed stops broadcast-
ing, the TV will shut off after 15 minutes.
Press one of keys 1-9
as required.
Press the two digits in
order from left to right.
1-9:
10-80:
VOLUME 32
To cut off the sound, press this
button once. The unit will be
silenced and the symbol "MUTE"
will appear on the screen. The
muting can be released by
pressing MUTE again or
VOLUME ▲ / ▼ buttons.
Press and release CH/PAGE
or .
For channels to change properly,
they must be tuned into the unit
memory.
Press DISPLAY. The current time, channel number, real time
tape counter, tape speed and VCR operation will be indicated.
Press DISPLAY again to remove the call display.
This button allows you to go back to the last channel selected by
pressing CHANNEL RETURN. Press this button again to return
to the last channel you were watching.
Current time
VCR operation
Channel No.
Real Time Tape Counter
Auto Repeat
Tape In
Tape Speed
TV/VCR mode or DVD mode
USING CH/PAGE OR BUTTON
MUTE
DISPLAY
CHANNEL RETURN
5N50201B [E] P10-13 6/28/04, 11:04 AM13