Operation Manual

32 Basic Operations
Answering a Call
When a call is received, the ringtone plays and the external light flashes. If the phone
number is in the Contacts list (page 47), the name and phone number of the caller
appear on the display.
1. Press .
2. Press to end the call.
Rejecting a Call
You can manually reject an incoming call. To automatically reject calls from specific
phone numbers, add the phone numbers to the Rejection list (page 139).
1. A call is received.
2. Press .
Note
When the cost limit (page 34) is set
to On, a call will be disconnected if
the total cost reaches the specified
maximum call limit during the call.
Tip
 To adjust the ringtone volume while a
call is being received, use or
the side keys ( , ). To set the
ringtone volume to mute, press and
hold the side key ( ).
 If you miss a call, the information
prompt (page 20) appears.
 You can also use Open to Answer
(page 137) or Any Key Answer
(page 137) to answer a call.
en_TX62.book Page 32 Monday, May 29, 2006 5:12 PM