Operation Manual

24
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals
Connecting audio devices
The dynadock™ provides two audio ports, as shown in the
following illustration
.
(Sample Illustration) dynadock™ audio ports
The following table indicates which port to use for each type of
audio activity.
When your computer is docked, the audio ports on the computer are
automatically disabled and the audio ports on the dynadock™ are
automatically enabled. In most cases, simply connect your audio
device to the appropriate port on the dynadock™ and the port is
ready to use. To use the computer’s audio ports (instead of the
dynadock's audio ports) when the computer is docked, please see
“Configuring audio ports” on page 35.
If you switch between the computer's audio ports and the dynadock's
audio ports, you may have to restart your media player if it is
running.
Activity Audio Device Use this port:
Audio playback Headphones/headsets/
speakers
Headphone jack
Audio recording Microphone Microphone jack
Microphone jack
Headphone jack
NOTE