Operation Manual

32
Preparation for use
Connecting a USB device
Connecting a USB device
Connecting multiple USB devices using the USB hub function
The USB hub of this monitor is equipped with two switchable upstream ports. One is for connecting an external computer,
and the other is for connecting an OPS-compliant computer internally. Only the selected upstream port is connected to the
USB hub. Use the OSD screen function to select the appropriate upstream port. See pages 46 and 62.
1 [When using an external computer]
Connect the USB port (Standard A) on the computer and the USB upstream port (Standard B) on the monitor using a
USB cable (commercially available).
[When using an OPS-compliant computer]
Install an OPS-compliant computer (connected internally).
2 Connect a USB device to the downstream port of this monitor.
USB devices
(mouse, touch panel, etc.)
Internal structure of the monitor’s USB function
Switch
Upstream port
Downstream port
Internal hub
When using an external
computer
When using an OPS-compliant
computer
USB
(Sample Illustration) 42”
• The USB hub function cannot control the monitor.
• Up to 5 hubs can be cascaded in the hub function of this monitor. Carry out operation check in advance even if you
connect a device pursuant to the USB standards.
Connecting a USB device