Integrated Wireless Handset User Guide

Standard Features
Call Forward
Strata AirLink Integrated Wireless Handset 5/99
85
Call Forward–External
➤
➤➤
➤
To cancel a CF–External
i
Press
&$//
+
&9:3
+
(1'
.
➤
➤➤
➤
To change a remote forwarding destination number
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Store the destination
number at Station SD
location code 49.
Notes
♦
Only perform Step 1 the first time CF-External
is set or when you change the destination. It is
not necessary to store the destination each time;
it remains in system memory.
♦
The LCR access code “9” cannot be used.
2. Press
&$//
+
&9:3
. Incoming calls forward to the destination stored at
Station Speed Dial Location 49.
1. Call into the Strata
DK system over a CO
line programmed for
DISA.
You hear ringback tone signal, then internal dial
tone for 10 seconds. Try again if you hear busy tone.
Note
See the System Administrator for DISA
telephone numbers.
2. After you get dial
tone, press
&9:3
+
your [PDN].
You hear a confirmation tone.
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote
CF–External security
code.
You hear a confirmation tone. See the System
Administrator for the security code that is assigned
to your handset in system programming.