Integrated Wireless Handset User Guide

Digital Features
Call Forward (CF)
Strata AirLink Integrated Wireless Handset 5/99
45
➤
➤➤
➤
To change a remote forwarding destination number
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Call into the Strata
DK system over a CO
line programmed for
DISA.
You hear ringback tone signal, then internal dial
tone for 10 seconds. Try again if you hear busy tone.
Note
See the System Administrator for DISA
telephone numbers.
2. After you get dial
tone, press
&9:3
+
your [PDN].
You hear a confirmation tone.
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote
CF–External security
code.
You hear a confirmation tone. See the System
Administrator for the security code that is assigned
to your handset in system programming.
4. Enter the new
destination.
Notes
♦
You can enter an internal number, Voice Mail
number, or a CO line access code + an external
telephone number.
♦
With some systems, you can dial a line group
code instead of a CO line number access code.
(See “CO Line Access Codes”on Page 109 for
access code information.)
5. Press
&
+
(1'
. You hear a confirmation tone.