Integrated Wireless Handset User Guide

Digital Features
Account Code Calls
32
Strata AirLink Integrated Wireless Handset 5/99
Account Code Calls
Account Codes are used for billing, call tracking, and line restriction applications.
The codes are recorded and printed in a SMDR report.
Forced Account Codes
Forced Account Codes are set in system programming to record outgoing calls only.
When they are set at your station, you are required to enter the code before dialing a
telephone number.
➤
➤➤
➤
To use a Forced Account Code
Voluntary Account Codes
Voluntary Account Codes are entered anytime after accessing a CO line or during a
call. If you enter the code after accessing a CO line, you are reconnected to the
outside caller or you hear dial tone.
If the system is also set for Verified Account Codes, you must enter that code also
after entering the Voluntary Account Code. If the code is not entered, the call is not
validated for the SMDR report.
An exception is the Voluntary Account Code that changes the Toll Restriction
classification of your station. This code accesses telephone numbers outside your
usual dialing area and must be entered
prior
to dialing the telephone number.
For example, if your station is restricted to local area calls, you can make out-of-
state calls by using a Voluntary Account Code set in system programming.
1. Press
&$//
. You hear dial tone.
2. Enter a CO line
Access Code.
See Table 9 on Page 109.
3. Enter the Forced
Account Code.
You hear dial tone if you have entered a valid
Account Code or busy tone, if invalid.
4. Enter the telephone
number.