Operation Manual

35
TV viewing
Searching a specific channel
If you know the frequency of a channel you need,
you can save the searching time by specifying the
frequency.
1) In DTV mode, press MENU.
2) Press / to select “Manual Search” or “Auto
Search”, then press ENTER.
Manual Search: To specify the frequency.
Auto Search: To specify the frequency range.
3) Set the channel data.
Auto Search
Start Freq(KHz)
End Freq(KHz)
Bandwidth
4 90000
490000
8M
Manual Search
Freq(KHz)
Bandwidth
4 90000
8M
e.g.
/
/
/
/
4) Press ENTER.
Channel search starts.
When complete, “Installation” menu returns.
Selecting your area
If you move to another country, change the setting so
that active channels in the area can be tuned in.
1) In DTV mode, press MENU.
2) Press
/ to select “System Setup”, then
press ENTER.
3) Press
/ to select “Area”.
System Setup
OSD Language
Area
: English
: Germany
Germany
England
Italy
France
Spain
Holland
4)
Press
and / to select your area/country,
then press ENTER.
5) Press ENTER.
6) Press MENU to close the menu.
Note
• If you select “OSD Language” at step 3, you can change the
language of “Installation” menu.
SDP74DTWE_E_01-56.indd 35SDP74DTWE_E_01-56.indd 35 2010/05/07 16:13:302010/05/07 16:13:30