User's Manual
3
English
Introduction
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference
Should the unit require maintenance, contact an authorized service location.
Useofcontrolsoradjustmentsorperformanceofproceduresotherthanthosespeciedhereinmayresultin
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
CAUTION:Theseservicinginstructionsareforusebyqualiedservicepersonnelonly.Toreducetheriskof
electric shock do not perform any servicing other than that contained in the operating instructions unless you are
qualiedtodoso.
Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from the
mains power, pull out the power plug from the wall outlet.
Environmental Information
All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials;
cardboard(box),polystyrenefoam(buffer)andpolyethylene(bags,protectivefoamsheet).
Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old
equipment.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No. Serial No.
Retain this information for future reference.
LASER
Type Semiconductor laser
InGaAIP(DVD)
AIGaAs(CD)
Wavelength657nm(DVD)
790nm(CD)
OutputPower5.5mW(DVD)
7.0mW(VCD/CD)
Beam divergence 60 degrees