Manual

I I

Adjust the following settings for the built-in 5.1 channel

surround decoder.

Distance

If you connected speakers to your DVD/VCR Receiver,

setting the Distance lets the speakers know how far the

sound has to travel to reach your set listening point.

This allows the sound from each speaker to reach the

listener at the same time. (1-20 ft, 1 ft = 0.30 m)

Note

You can not set the distance of subwoofer speaker.

1. Select "5.1 Speaker Setup" using the A/V

buttons on the setup menu.

2. While "5.1 Speaker Setup" is selected, press •

button.

3. Press I_ buttons to select the desired speaker.

4. Adjust options by using AT4 I_ buttons.

Speaker selection

Select a speaker that you want to adjust. ((Front speak-

ers (Left), Centre Speaker, Front speakers (Right), Rear

speakers (Left), Rear speakers (Right), or Subwoofer))

Note

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Test

Press ENTER to test the signals of each speaker.

Adjust the volume to match the volume of test signals

memorized in the system.

• Front Left (L) -_ Centre -_ Front Right (R) -_

Rear Right (R) -_ Rear Left (L) -_ Subwoofer

Return

Press ENTER to return to the previous menu.

Volume

Press 4 / I_ to adjust the output level of the selected

speaker. (-6dB - 6dB)

Size

Since the speaker settings are fixed, you cannot

change the settings.

• Subwoofer's size is fixed "Large" and the other

speaker's size are fixed "small".

I I